2 . Pr ogr am m i ng Conc e pts2- 3SpecificationsWordRegisterT Current value T0~T255, 256 wordsC Current value C0~C199, 16-bit counter, 200 wordsC200~C254, 32-bit counter, 55 wordsD DataregisterGeneralD0~D407, 408 words, (*1)D600~D999, 400 words, (*1)D3920~D9999, 6080 words, (*1)Total10000 pointsLatched D408~D599, 192 words, (*2)D2000~D3919, 1920 words, (*2)Special D1000~D1999, 1000 words, someare latchedFor SpecialmudulesD9900~D9999，100 words, (*1),(*5)Index E0~E7, F0~F7, 16 words, (*1)PointerN Master control loop N0~N7, 8 pointsP Pointer P0~P255, 256 pointsI InterruptServiceExternal interruptI000/I001(X0), I100/I101(X1), I200/I201(X2),I300/I301(X3), I400/I401(X4), I500/I501(X5),I600/I601(X6), I700/I701(X7), 8 points (01: rising-edge trigger , 00: falling-edge trigger )Timer interruptI602~I699, I702~I799, 2 points (Timer resolution =1ms)I805~I899, 1 point (Timer resolution = 0.1ms)(Supported by V2.00 and above)High-speedcounter interruptI010, I020, I030, I040, I050, I060, I070, I080,8pointsCommunicationinterruptI140(COM1), I150(COM2), I160(COM3), 3 points,(*3)ConstantK DecimalK-32,768 ~ K32,767 (16-bit operation),K-2,147,483,648 ~ K2,147,483,647 (32-bitoperation)H Hexadecimal H0000 ~ HFFFF (16-bit operation),H00000000 ~HFFFFFFFF (32-bit operation)Serial portsCOM1: built-in RS-232 ((Master/Slave)COM2: built-in RS-485 (Master/Slave)COM3: built-in RS-485 (Master/Slave)COM1 is typically the programming port.Ethernet(*8): built-in Ethernet, refer to appendix Bfor more details on operationReal Time Clock(*6) Year, Month, Day, Week, Hours, Minutes, SecondsSpecial I/O Modules Up to 8 special I/O modules can be connectedFile Register(*7) K0~K4999, 5000 points (*2)Notes:1. Non-latched area cannot be modified2. Latched area cannot be modified3. COM1: built-in RS232 port. COM2: built-in RS485 port. COM3: built-in RS485 port.4. When input points(X) are expanded to 256 points, only 16 output points(Y) are applicable. Also,when ouput points(Y) are expanded to 256 points, only 16 input points(X) are applicable.5. This area is applicable only when the ES2/EX2 MPU is connected with special I/O modules.Every special I/O module occupies 10 points.6. PLC with firmware version 2.00 or later support the function of keeping track of the currenteven after the power is off. When the power is off, this function can go on for about 1 week.7. PLC with firmware version 2.00 or later versions support the function of file register. Refer tothe instructions MEMR/MEMW for more details on operation.Ethernet: this function is only available for DVP-EX2-E series PLC.
