DVP- ES2/ EX2/ SS2/ SA2/ SX2/ SE&TP O pe r a t i on Ma nua l - Pr ogr am m i ng2- 4603: requested data exceeds the range.07: checksum errorFunction Group Pulse output Mark and Mask functionNumber M1108, M1110, M1156, M1158, M1538, M1540, D1026, D1027, D1135, D1136,D1232, D1233, D1234, D1235, D1348, D1349Contents:Please refer to explanations of API 59 PLSR / API 158 DDRVI / API 197 DCLLM instructions.Function Group Execution Completed FlagNumber M1029, M1030, M1102, M1103Contents:Execution Completed Flag:MTR, HKY, DSW, SEGL, PR:M1029 = ON for a scan cycle whenever the above instructions complete the execution.PLSY, PLSR:1. M1029 = ON when Y0 pulse output completes.2. M1030 = ON when Y1 pulse output completes3. M1102 = ON when Y2 pulse output completes.4. M1103 = ON when Y3 pulse output completes.5. When PLSY, PLSR instruction are OFF, M1029, M1030, M1102, M1103 will be OFF as well.When pulse output instructions executes again, M1029, M1030, M1102, M1103 will be OFFand turn ON when execution completes.6. Users have to clear M1029 and M1030 manually.INCD:M1029 will be “ON” for a scan period when the assigned groups of data comparison is completedRAMP, SORT:1. M1029= ON when instruction is completed. M1029 must be cleared by user manually.2. If this instruction is OFF, M1029 will be OFF.DABSR:1. M1029= ON when instruction is completed.2. When the instruction is re-executed for the next time, M1029 will turn off first then ON againwhen the instruction is completedZRN, DRVI, DRVA:1. M1029 will be “ON” after Y0 and Y1 pulse output is completed. M1102 will be “ON” after Y2and Y3 pulse output is compeleted.2. When the instruction is re-executed for the next time, M1029 / M1102 will turn off first then ONagain when the instruction is completed.Function Group Clear InstructionNumber M1031, M1032Contents:M1031 (clear non-latched memory), M1032 (clear latched memory)Device Devices will be clearedM1031Clear non-latched areaContact status of Y, general-purpose M and general-purpose S General-purpose contact and timing coil of T General-purpose contact, counting coil reset coil of C General-purpose present value register of D General-purpose present value register of T General-purpose present value register of CM1032Clear latched areaContact status of M and S for latched Contact and timing coil of accumulative timer T Contact and timing coil of high-speed counter C for latched Present value register of D for latched Present value register of accumulative timer T Present value register of high-speed counter C for latched
