DVP- ES2/ EX2/ SS2/ SA2/ SX2/ SE&TP O pe r a t i on Ma nua l - Pr ogr am m i ng2- 526. The descriptions of the special data registers for the analog functions:Device FunctionD1062Average number of times analog input signals are input through CH0~CH3 of20EX2/SX2: 1~20, Default = K2Average number of times analog input signals are input through CH0~CH2 of30EX2: 1~15, Default = K2D1110 Average value of EX2/SX2 analog input channel 0 (AD 0)D1111 Average value of EX2/SX2 analog input channel 1 (AD 1)D1112 Average value of EX2/SX2 analog input channel 2 (AD 2)D1113Average value of 20EX2/SX2 analog input channel 3 (AD 3)If D1062 is ON, the average value is the current value.Displaying the status of the analog input channel of 30EX2Please see the explanation below for more information.D1114Enable/disable 20EX2/SX2 AD channels(0: enable (default) / 1: disable)bit0~bit3 sets AD0~AD3.30EX2 does not support this function.D1116 Output value of analog output channel 0 (DA 0) of EX2/SX2D1117 Output value of analog output channel 1 (DA 1) of 20EX2/SX230EX2 does not support this function.D1118 For EX2/SX2 series, sampling time of analog/digital conversion. Samplingtime will be regarded as 2ms If D1118≦2.The description of D1113 for 30EX2:Bit15~12 Bit11~8 Bit7~4 Bit3~0Reserved Status of the analoginput channel (AD2)Status of the analoginput channel (AD1)Status of the analoginput channel (AD0)The status of the analog input channel of 30EX2:Status 0x0 0x1 0x2Description Normal The analog input exceeds theupper/lower limit.The temperature sensor isdisconnected.The upper/lower limit values for the analog input mode of 30EX2:Analog input mode Upper limit value Lower limit valueVoltage-10~+10 V +32384 -32384-5V~+5 V+1 V~+5 V +32384 -384Current -20 mA~+20 mA +32384 -32384+4 mA~+20 mA +32384 -384Temperature PT100/PT1000 +8100 -1900NI100/NI1000 +1800 -900Devicenumber FunctionD111520EX2/SX2 analog input/output mode setting (Default=H’0)bit0~bit5: Selection between the voltage/current mode (0: Voltage; 1: Current;Default: Voltage)bit0~bit3: Analog inputs (AD0~AD3)bit4~bit5: Analog outputs (DA0~DA1)bit8~bit 13: Current modebit8~bit11: AD0~AD3 (0: -20 mA~20 mA; 1: 4~20 mA)bit12~bit13: DA0~DA1 (0: 0~20 mA; 1: 4~20 mA)30EX2 analog input/output mode setting (Default=H’FFFF)
