143APPENDICESAppendix D: Additional Scale Factor TableThe Additional Scale Factor Table is the same as the M-TEST Defaults file, which contains defaultvalues for all parameters used in the testing of Magtrol Dynamometers and Torque Transducers. TheM-TEST Defaults file is subject to change as ratings on Magtrol’s Motor Test Equipment changebut the most recent version of this file can always be accessed from our Web site at www.magtrol.com/support/downloads.htm#mtestdefaults. Simply click the link if you are connected to the Internetor type the web address into your browser.The file is saved in a tab delimited text format and can be accessed by Microsoft® Excel or LabVIEW™programs, including M-TEST. If you need this information to configure your DSP7000 but do nothave M-TEST 4.0 or 5.0, the text file can be imported into any spreadsheet or database program andthe default values can be manually programed into the DSP7000 via the front panel menu system.be sure to check the file frequently to make sure you have the most current data. Please feel freeto contact our sales department at 1-716-668-5555, if you should have any questions or concerns.
