Magtrol DSP7000 User Manual
                                                                                                                                                                | |
Contents
| 
2Magtrol Model DSP7000 Dynamometer ControllerChapter1 – IntroductionGENERALINFORMATION1.3 data sheetDSP7000Data SheetDSP7000SeriesHigh-SpeedProgrammableDynamometer Controllers1 www.magtrol.comMAGTROLFeatures• DSP7001 Single Channel: Low cost and easy to use• DSP7002 Dual Channel: Enables the support oftwo testing instruments with independent or tandemconfigurations and two fully independent control loops• Built-in Alarm System: For power, speed, torque,temperature, air flow, water flow, electrical overloadand external inputs• High Speed Data Acquisition: Up to 500 torque andspeed points per second of both channels with timestamp• High Quality, Easy-to-Read Vacuum FluorescentReadout: Displays torque, speed, power, auxiliary andPID (proportional gain, integral and derivative) values• Fast Full-Curve Data Acquisition: Free-run tolocked rotor in seconds• Speed & Torque Operating Modes: PID settings forexceptional dynamometer control• Programmable Digital PID Values: Controlled andstored via M-Test Software or controlled manually• Built-in Current-Regulated Supply: For use withHysteresis Dynamometer or brakes up to 1amp• Adjustable Torque Units: English, Metric and SI arestandard• Digital Filter: Removes undesired noise from torquesignals• Saving: Currently used configuration can be saved andrecalled at power up• Single or Multi-point Torque and Speed StabilizedTesting: Via M-TEST 7.0 Software• Closed Box Calibration• Rack Mounting: 19" (482.6 mm) with handles• Backwards Compatible: Compatible with theDSP6001 (in DSP6001 mode)• HD5 dynamometers: Supported• USB: Standard• Low RPM: calculation from angle (quadrature signal)and time designed to capture RPM’s as low as .001RPM• Position Measurement: Two quadrature decodersOPtIONs• Interfaces: RS-232 and IEEE-488• I/O card accessible programmatically (LabVIEW™,Visual C)DescrIPtIONMagtrol’s Model DSP7000 High Speed ProgrammableDynamometer Controller employs state-of-the-art DigitalSignal Processing Technology to provide superior motor testingcapabilities. Designed for use with any Magtrol Hysteresis,Eddy-Current or Powder Dynamometer, Magtrol In-LineTorque Transducer or auxiliary instrumentation, the DSP7000can provide complete PC control via the USB or optionalIEEE-488 or RS-232 interface. With up to 500 readings persecond, the DSP7000 is ideally suited for both the test lab andthe production line.aPPlIcatIONsIn the laboratory, the DSP7000’s high sample rate providessuperior resolution for data acquisition and curve plotting.This allows for capturing more usable motor test data duringswitching, breakdown and other transitional areas of themotor test curve. For production and incoming inspection,the DSP7000 displays torque, speed and power at all times,allowing the Controller to be used as a manual stand aloneunit or as part of a complete PC system.MOtOr testINg sOFtwareMagtrol’s M-TEST 7 Software (sold separately) is a state-of-the-art motor testing program for Windows®-based dataacquisition. Used with the Magtrol DSP7000 Controller,Magtrol M-TEST 7 Software provides the control of anyMagtrol Dynamometer and runs test sequences in a mannerbest suited to the overall accuracy and efficiency of the MagtrolMotor Test System. The data that is generated by Magtrol’sMotor Testing Software can be stored, displayed and printedin tabular or graphic formats, and can be easily imported intoa spreadsheet.Written in LabVIEW™, M-TEST 7 has the flexibility to testa majority of motor types in a variety of ways. Because ofLabVIEW’s versatility, obtaining data from other sources (e.g.thermocouples), controlling motor power and providing audio/visual indicators is relatively easy.Magtrol’s M-TEST 7 Software is ideal for simulating loads,cycling the unit under test and motor ramping. Because it iseasy to gather data and duplicate tests, the software is idealfor use in engineering labs, production testing and incoming/outgoing inspection.DSP7001 - single channelDSP7002 - dual channel |
Related manuals for Magtrol DSP7000
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine