20Magtrol Model DSP7000 Dynamometer ControllerChapter3 – Installation/Con gurationSETUP3.1.2 Main MenuWhen the DSP7000 is completely powered up and ready for use, the main menu will appear on thedisplay.POWERBRAKE STATUS SET POINT SET POINT P I DTORQUE SPEED USER DISPLAY0.000 WOFF0.000 OZ.IN0000 0% 0% 0%0Figure 3–4 Main Menu3.2 instrumentation setup (torque)The DSP7000 has the ability to support a combination of up to two testing instruments withindependent or tandem configurations.Note: In the TSC1 (Wb/Pb) and TSC2 (Wb/Pb) combination, theinstruments can be configured independently or as a tandem unit.The setup of your unit will depend on which option you choose. The following sections will illustrateand outline the hardware connection and software configurations needed to begin your testing, basedon your selection. For additional reference, see Appendix C: Front Panel/Display Menu Flow Charts.Each channel of the DSP7000 can support the following dynamometers:TSC 1/TSC 2HDWBPBTM/TFHD5
