16Magtrol Model DSP7000 Dynamometer ControllerChapter2 – ControlsGENERALINFORMATION TSC1/TSC2 Connect torque signal cable here.1. FLOW/CLUTCH2. TACH. B3. +24 VDC4. +24 VDC COM5. -24 VDC COM6. -24 VDC7. +5.0 VDC8. +5.0 VDC COM9. D.P. A10. TACH. A11. NC12. D.P. B13. TORQUE COMMON14. TORQUE SIGNALFigure 2–7 TSC1/TSC2 Connector SUPPLY 1/SUPPLY 2 Connect Wb/Pb DES supply for TSC1/TSC2 here.1. SHIELD (EARTH)2. ELECTRICAL ALARM3. SUPPLY 1-N/C / SUPPLY 2-CLUTCH4. SUPPLY +24VDC5. N/C6. +24 VDC COM7. CURRENT SET POINT (SIGNAL)8. WATER FLOW ALARM9. N/C10. TEMPERATURE ALARM11. STAND-BY12. N/C13. +24 VDC COM14. CURRENT SET POINT (ANALOG OV)15. N/CFigure 2–8 Supply 1/Supply 2 Connector USb Connect PC USb cable here.Figure 2–9 USB Connector PoWER Attach power cord here. EARTh gRoUND Attach earth ground here.
