58OPERATION6. Manually Controlled OperationNote: Using the DSP7000 without a computer will limit its testingcapabilities.6.1 how to set desired power unitsTo select the desired power units (W, kW or hP):1. Press the TSC button to select the desired channel.2. Press ShIFT.3. Press PoWER UNITS button. The display should appear as follows:POWERBRAKE STATUS SET POINT SET POINT P I DTORQUE SPEED USER DISPLAY0.000 XXXX0.000 XX.XX0000 0% 0% 0%0POWER UNITSFigure 6–1 Power Units Menu4. Use and buttons to select desired Power Units.5. Press ShIFT to return to main menu.6.2 how to set desired torque unitsTo select the desired torque units (N·m, cN·m, mN·m, kg·cm., g·cm., lb·ft., lb·in., oz·ft., oz·in.):1. Press ShIFT.2. Press ToRqUE UNITS button. The display should appear as follows:POWERBRAKE STATUS SET POINT SET POINT P I DTORQUE SPEED USER DISPLAY0.000 XXXX0.000 XX.XX0000 0% 0% 0%0 UNITSFigure 6–2 Torque Units Menu3. Use and buttons to select desired Torque Units.4. Press ShIFT to return to main menu.
