Panasonic AJ-PX270 Operating Instructions Manual

Also see for AJ-PX270: Settings guide Quick guide Specifications Operating instructions Operating instructions

Contents

– 115 –Chapter 5 Playback — Thumbnail operations2 Move the cursor over the text memo to be copied and press the control stick.You can select multiple text memos.3 Select [COPY] in the main menu → [CLIP].4 Select the copy target slot using the control stick and select [YES].f Copying starts.f The portion between the selected text memo and the next one is copied. If no text memo is found after the selected one, then the part after theselected text memo to the end of the clip is copied.f If multiple text memos are selected, the selected sections are copied.f While the clip is being copied, the progress of the copy process and cancelation will be displayed. To discontinue the copy process, press thecontrol stick. When the [YES]/[NO] confirmation screen is displayed, use the control stick to select [YES].@@ NOTEt In clip division and copying using the text memo, the area copied may be automatically modified and copied depending on the recording method of theclip.Deleting clips1 Use the control stick to move the cursor over the clip to be deleted, and press the control stick to select the clip.2 Select [DELETE] in the main menu → [CLIP] and press the control stick.3 Select [YES] using the control stick.The clip is deleted. All selected clips (in blue-green frames) are deleted by this operation.@@ NOTEt To interrupt the deletion process, press the button + button or press the control stick to cancel the operation. Once a clip is deletedhalfway, it cannot be restored even if the deletion process is aborted.Restoring clipsYou can restore clips that were made defective as a result of sudden power-down during recording or removal of the P2 card being accessed.1 Use the control stick to move the cursor over the clip to be restored (defective clips are indicated by defective clip marks) andpress the control stick to select the clip.2 Select [REPAIR] in the main menu → [CLIP] and press the control stick.3 Select [YES] using the control stick.This restores the clip.@@ NOTEt To find defective clips, set the main menu → [CLIP] → [REPOSITION] to [NG CLIPS]. Only defective clips are displayed. For details, refer to “Settingthumbnails to be displayed” (page 112).t You can restore clips with yellow defective clip indicators. Delete clips with red defective clip indicators. If the clips cannot be deleted, format the P2card.During restoration of the clips, however, the defective clip indicator may change from yellow to red, and result in the inability to restore the clips.t When defective clips containing proxy data are restored, proxy data will be deleted.Reconnecting incomplete clipsIncomplete clips may be generated when clips recorded on multiple P2 cards (connected clips) are separately copied from each card. The reconnectionfunction generates one clip (the original, connected clip) from incomplete clips.1 Use the control stick to select incomplete clips to be linked.Usually, thumbnails of incomplete clips (clips with indication) are displayed next to each other.2 Select [RE-CONNECT] in the main menu → [CLIP] and press the control stick.3 Select [YES] using the control stick.This reconnects incomplete clips.@@ NOTEt Incomplete clip indicators will remain displayed when only some clips are reconnected, unless all the constituent clips of the original clip arereconnected.Copying clipsSelected clips can be copied to a P2 card or a connected USB storage device in the desired slot.1 Use the control stick to move the cursor over the clip to be copied, and press the control stick to select the clip.2 Move the cursor to the copy target from the [COPY] list in the main menu → [CLIP] and press the control stick.f When multiple clips are selected, the number of selected clips is displayed after pressing the control stick.