–18–Chapter 2 Description of Parts—Left side13 switchSelect the method to adjust the focus, gain, iris, white balance, and shutter speed at shooting. You can set the function to assign to in themain menu→[AUTO SW].:Adjust automatically. (Auto mode):Adjust manually. (Manual mode)14 buttonSelect the microP2 memory card slot for the target of recording.This button can be used as the USER button (USER7). (page39)15Diopter adjustment lever (page42)Adjust the diopter scale so that the viewfinder screen can be viewed clearly.16/ switch (page64)Switch audio input signals connected to the :Select when audio equipment is connected by the line input.:Select when the external microphone is connected.<+48V>:Select when the external microphone is connected and the microphone needs power supply.17/ switch (page64)Select the audio to be recorded to audio channel 1/2./:Record left audio (right audio) of the built-in microphone.:Record input signals from the :Record input signals from the 18/ switch (page65)Select the method to adjust the input level of audio channel 1/2.:Adjust automatically.:Adjust using the 1965)Adjust the recording level of audio channel 1/2.20Internal speakerOutput audio during playback.When connecting the headphones to the headphones terminal, audio from the speaker turns off automatically.21HANDLE ZOOM switch (page55)Select the operation of the zoom lever (handle side).:Zoom in/out with the speed set in the main menu→[SW MODE]→[H.ZOOM SPEED].:Zoom speed changes depending on how strong the lever is pushed. (When pushed gently, the speed becomes slower, and when pushedstrongly, it becomes faster.):The zoom lever does not work.22 switch (page48)Select the filter to suit the illumination of the subject.<1/64>:Reduce the amount of light entering the MOS sensor to 1/64.<1/16>:Reduce the amount of light entering the MOS sensor to 1/16.<1/4>:Reduce the amount of light entering the MOS sensor to 1/4.:Does not use the ND filter.23 button (page48)Select the method for adjustment of the lens iris.24 button (page49)Enables/disables the focus assist function which is set in the main menu→[SW MODE]→[FOCUS ASSIST MODE].This button can be used as the USER button (USER1). (page39)25 button (page48)Switch on/off the macro function of the focus.This button can be used as the USER button (USER2). (page39)26 switch (page48)Select the focus function.:Changes to the auto focus mode. Adjust the focus automatically.:Changes to the manual focus mode. Control the focus ring manually to adjust the focus.<c>:Changes to the manual focus mode after the focus distance is set to infinity.This is the spring switch. Even when the switch is pushed towards the <c> side, the switch returns to the position.27 button (page49)When the button is pressed in manual focus mode, focus is adjusted automatically while it is pressed.28 button (page74)Switch on/off the image stabilization function.This button can be used as the USER button (USER3). (page39)29 button (page73)Select the display of either zebra of marker.This button can be used as the USER button (USER4). (page39)30 button (page75)Select whether to display the waveform monitor on the LCD monitor.This button can be used as the USER button (USER5). (page39)31 buttonSwitch on/off the auto iris function.Set the target value of the auto iris level in the main menu→[SCENE FILE]→[A.IRIS LEVEL EFFECT].This button can be used as the USER button (USER6). (page39)
