– 127 –Chapter 6 Menu Operations — Setting menu displayf The confirmation screen is displayed depending on the menu item.Press the control stick upward/downward/to the left/to the right to select the operation, and then press the control stick.A checkmark is placed in front of the set item.f In some menus, a screen for setting value is displayed on the menu screen (Fig. 3) or at the bottom of the screen (Fig. 4).4 Press the f This brings you back automatically to the previous screen depending on the menu item.r Selecting menu item with the dial button1 Press and hold the f The main menu screen is displayed in the viewfinder and on the LCD monitor.2 Turn the dial button to place the cursor on the desired menu item. (Fig. 1)f The cursor moves up/down by turning the dial button upward/downward.f If there is a menu in the next level, [w] is displayed in the menu items.Pressing the dial button opens the lower-level menus. (Fig. 2)f You can go back to the upper levels by pressing the button or by placing the cursor on the topmost line ([EXIT]) then pressing the PUSH SET> dial button.3 Press the dial button.f The confirmation screen is displayed depending on the menu item.Turn the dial button to select the operation, and then press the dial button.A checkmark is placed in front of the set item.f In some menus, a screen for setting value is displayed on the menu screen (Fig. 3) or at the bottom of the screen (Fig. 4).4 Press the f This brings you back automatically to the previous screen depending on the menu item.r Performing cancellation while setting1 Press the button. Alternatively, press the button while holding down the button.[MENU CANCEL BACK TO PREV] is displayed. (Fig. 5)2 Press the button again. Alternatively, press the button while holding down the button.The changed value returns to the value before changing.@@ NOTEt A restart of the camera is required when the system frequency setting or the number of lines, or the network connection method is changed.Setting [USER MENU]1 Select the main menu → [USER MENU SEL].2 Select and display various items according to level.3 Put checkmarks [l] on the items to be displayed in [USER MENU].You can select menu items in each item or page. You can select up to 64 items.Selected items are displayed on the main menu page or item in order.[USER MENU] settings can also be saved on or loaded from the camera and the SD memory card at the same time as a user file.Setting menu initializationThe values set in the setting menu are saved in the user file and scene file. Both the user file and scene file can be initialized to the factory settings.Initializing user file (all items except for the scene file)1 Select [INITIALIZE] in the main menu → [OTHER FUNCTIONS] → [USER FILE].Initializing selected scene file1 Select the scene file to initialize in the main menu → [SCENE FILE] → [FILE SELECT].2 Select [INITIALIZE] in the main menu → [SCENE FILE] → [LOAD/SAVE/INITIALIZE].
