Panasonic AJ-PX270 Operating Instructions Manual

Also see for AJ-PX270: Settings guide Quick guide Specifications Operating instructions Operating instructions

Contents

– 134 –Chapter 6 Menu Operations — Menu listItem Description of settings[KNEE MASTER POINT] Sets the knee point position in 0.5% steps.[70.0%]…[107.0%]f Factory setting: [93.0%][KNEE MASTERSLOPE]Sets the knee inclination.[0]…[99]f Factory setting: [85][KNEE MASTER SLOPERch]Sets the knee inclination of Rch.[−31]…[31]f Factory setting: [0][KNEE MASTER SLOPEBch]Sets the knee inclination of Bch.[−31]…[31]f Factory setting: [0][HI-COLOR SW] Turns the mode that expands the color dynamic range [ON]/[OFF].[ON], [OFF]f Factory setting: [ON][HI-COLOR LVL] Selects the level of the mode that expands the color dynamic range.[1]…[32]f Factory setting: [32][WHITE CLIP SETTING] [WHITE CLIP] Turns the white clip function [ON]/[OFF]. This enables the [WHITE CLIP LVL] setting value when thefunction is [ON].[ON], [OFF]f Factory setting: [ON][WHITE CLIP LVL] Sets the white clip level.[90%]…[109%]f Factory setting: [109%][Rch CLIP LVL] Sets the clip level Rch for the white clips.[−31]…[31]f Factory setting: [0][Bch CLIP LVL] Sets the clip level Bch for the white clips.[−31]…[31]f Factory setting: [0][DRS] Enables/disables the dynamic range stretcher function.[ON], [OFF]f Factory setting: [OFF]If functions are assigned to the USER buttons, switches [ON]/[OFF] using the USER button operations.[DRS EFFECT DEPTH] Sets the compression level of the high-brightness areas of the dynamic range stretcher function. Bycompressing the video signal levels of the high-brightness areas that are blown out in normal shooting, thedynamic range can be expanded.[1], [2], [3]f Factory setting: [1][A.IRIS LEVEL] Enables/disables the auto iris level function.[ON], [OFF]f Factory setting: [ON]If functions are assigned to the USER buttons, switches [ON]/[OFF] using the USER button operations.[A.IRIS LEVEL EFFECT] Adjusts the brightness in the auto iris mode. Increase the value to brighten, and decrease the value todarken the convergence of auto iris.[−50]…[50]f Factory setting: [0][SYSTEM MODE]Configure the settings regarding the recording format of video and audio.Item Description of settings[LINE&FREQ] Sets the signal format of the camera. If this setting has been changed, select [YES] on a confirmationmessage and restart the camera.[1080-59.94P], [1080-50P], [1080-59.94i], [1080-50i], [1080-23.98PsF], [720-59.94P], [720-50P],[480-59.94i], [576-50i][REC FORMAT] Selects the codec for recording and the mode for shooting and recording.[AVC-I200/60P], [AVC-I200/60i], [AVC-I200/50P], [AVC-I200/50i], [AVC-I200/30PN], [AVC-I200/25PN],[AVC-I200/24PN], [AVC-I100/60P], [AVC-I100/60i], [AVC-I100/50P], [AVC-I100/50i], [AVC-I100/30PN],[AVC-I100/24PN], [AVC-I100/25PN], [AVC-I50/60P], [AVC-I50/60i], [AVC-I50/50P], [AVC-I50/50i],[AVC-G50/60P], [AVC-G50/60i], [AVC-G50/50P], [AVC-G50/50i], [AVC-G25/60P], [AVC-G25/60i],[AVC-G25/50P], [AVC-G25/50i], [AVC-G12/60P], [AVC-G12/60i], [AVC-G12/50P], [AVC-G12/50i],[DVCPRO HD/60P], [DVCPRO HD/60i], [DVCPRO HD/50P], [DVCPRO HD/50i], [DVCPRO50/60i],[DVCPRO50/50i], [DVCPRO/60i], [DVCPRO/50i], [DV/60i], [DV/50i][CAMERA MODE] Sets the camera shooting mode for the 1080i SD mode.[60i], [50i], [30P], [25P][AUDIO SMPL RES] Selects the number of audio bits ([24BIT] or [16BIT]) when [REC FORMAT] is [AVC-I100] or [AVC-I50].At [REC FORMAT] other than these, recording is performed at the number of audio bits fixed to 24 bits or16 bits.[16BIT], [24BIT][ASPECT CONV] Selects the aspect ratio of the video to be recorded in 480i, 576i.[SIDE CROP], [LETTER BOX], [SQUEEZE]f Factory setting: [SIDE CROP]