Read this first!– 3 –indicates safety information.CAUTION:Keep metal objects (such as necklaces andhairpins) away from the battery.Short-circuiting may occur across the terminals,causing the battery to heat up, and you mayseriously burn yourself if you touch the battery inthis state.CAUTION:A coin type battery is installed inside of the unit.Do not store the unit in temperatures over 60 °C(140 °F).Do not leave the unit in an automobile exposed todirect sunlight for a long period of time with doorsand windows closed.CAUTION:This apparatus can be operated at a voltage in the range of 100-240 V AC.Voltages other than 120 V are not intended for U.S.A. and Canada.Operation at a voltage other than 120 V AC may require the use of a different AC plug. Please contact eithera local or foreign Panasonic authorized service center for assistance in selecting an alternate AC plug.FCC NOTICE (USA)Declaration of ConformityModel Number: AJ-PX270Trade Name: PanasonicResponsible Party: Panasonic Corporation of North AmericaTwo Riverfront Plaza, Newark, NJ 07102Support contact: 1-800-524-1448This device complies with Part 15 of the FCC Rules.Operation is subject to the following two conditions:(1) This device may not cause harmful interference, and (2) this device must accept any interferencereceived, including interference that may cause undesired operation.To assure continued compliance, follow the attached installation instructions and do not make anyunauthorized modifications.CAUTION:This equipment has been tested and found to comply with the limits for a Class B digital device, pursuantto Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmfulinterference in a residential installation. This equipment generates, uses and can radiate radio frequencyenergy and, if not installed and used in accordance with the instructions, may cause harmful interferenceto radio communications. However, there is no guarantee that interference will not occur in a particularinstallation. If this equipment does cause harmful interference to radio or television reception, whichcan be determined by turning the equipment off and on, the user is encouraged to try to correct theinterference by one or more of the following measures:• Reorient or relocate the receiving antenna.• Increase the separation between the equipment and receiver.• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.• Consult the dealer or an experienced radio/TV technician for help.The user may find the booklet “Something About Interference”available from FCC local regional offices helpful.FCC Warning:To assure continued FCC emission limit compliance, follow the attached installation instructions and theuser must use only shielded interface cables when connecting to host computer or peripheral devices.Also, any unauthorized changes or modifications to this equipment could void the user’s authority tooperate this device.
