Panasonic AJ-PX270 Operating Instructions Manual

Also see for AJ-PX270: Settings guide Quick guide Specifications Operating instructions Operating instructions

Contents

– 138 –Chapter 6 Menu Operations — Menu listItem Description of settings[AGC] Sets the auto gain control operations when [ON] is selected in [A.IRIS].[ON]: Performs the operation of the [AGC] function that automatically adjusts camera gain when in automode.[OFF]: Does not perform the operation of the [AGC] function that automatically adjusts camera gain whenin auto mode.f Factory setting: [ON][AGC LIMIT] Sets the maximum gain value during [AGC] operation.[3dB], [6dB], [12dB], [18dB]f Factory setting: [6dB][AGC POINT] Sets the F value to switch control to [AGC] from auto iris during [AGC] operation.[F4.0], [F5.6]f Factory setting: [F4.0][A.SHUTTER] Sets the auto shutter control operations when [ON] is selected in [A.IRIS].[ON]: Performs the operation of auto shutter when in auto mode.[OFF]: Does not perform the operation of auto shutter when in auto mode.f Factory setting: [ON][A.SHUTTER LIMIT] Sets the maximum shutter value during [A.SHUTTER] operation.[1/100], [1/120], [1/250]f Factory setting: [1/250][A.SHUTTER POINT] Sets the F value to switch control from auto iris to [A.SHUTTER] during [A.SHUTTER] operation.[F8.0], [F9.6]f Factory setting: [F8.0][ATW] Sets the operations of the auto tracking white balance function.[ON]: Activates the auto tracking white balance function when in auto mode. The [ATW] function cannotbe switched between enabled and disabled with the switch or USER buttons. However, if[ATW LOCK] is assigned to the USER button, the white balance value can be fixed with the USER button.[OFF]: [ATW] function operation is not performed in auto mode. Performs the operation of the whitebalance function selected with the switch.f Factory setting: [ON][AF] Sets the operation of the auto focus.[ON]: Performs the operation of auto focus when in auto mode. The switch does not work.[OFF]: Does not perform the operation of auto focus when in auto mode. Activates the focus functionselected with the switch.f Factory setting: [ON][RECORDING SETUP]These are various types of setting items when performing camera recording and playback.Set the system frequency, the number of lines, recording format, and recording method.Item Description of settings[REC MEDIA] Selects the slot for the media to be recorded.[microP2]: Uses microP2 memory cards (slots 1 and 2).[P2]: Uses P2 memory card (card slot 3).f Factory setting: [microP2][FILE SPLIT] Selects the split method of the recording file.[ONE FILE]: The clip is recorded in one file in the AVC-LongG format to a microP2 memory card(exceeding 32 GB).[SPLIT]: The clip is split every 4 GB regardless of the recording format.[SHORT SPLIT]: The clip is split every 128 seconds regardless of the recording format.f Factory setting: [SPLIT]If the clip is recorded in one file, it cannot be copied to a P2 memory card or 32 GB microP2 memory card,or copied or exported to storage.When [ONE FILE] is selected, proxy recording is not possible. Also, when the main menu → [RECORDINGSETUP] → [DUAL CODEC SETTING] → [CODEC USAGE] is set to [PROXY REC(P2)] or [PROXYREC(P2&SD)], [ONE FILE] cannot be selected.It will be divided to recording files of approximately 128 seconds when [SHORT SPLIT] is selected, butthey can be operated as a single clip when the thumbnail of the clips are operated on the P2 device. Asingle continuous recording time is approximately 3.5 hours. [SHORT SPLIT] is disabled in interval, one-shot, loop, and background recording modes.[RECORDING] Selects the recording format.[NORMAL]: Performs standard recording.[INTERVAL]: Performs interval recording.[ONE SHOT]: Performs one-shot recording.[LOOP]: Performs loop recording.f Factory setting: [NORMAL][RECORDINGSETTING][RECORDING HOLD] Selects whether to hold [RECORDING] settings.[ON]: Holds the settings.[OFF]: Does not hold the settings. It will always be [NORMAL] the next time when the power is turned on.f Factory setting: [OFF][ONE SHOT TIME] Sets the recording duration of one-shot recording.[1frm], [2frm], [4frm], [8frm], [16frm], [1s]f Factory setting: [1frm][INTERVAL TIME] Sets the interval duration for interval recording.[2frm], [4frm], [8frm], [16frm], [1s], [2s], [5s], [10s], [30s], [1min], [5min], [10min]f Factory setting: [2frm]