Panasonic AJ-PX270 Operating Instructions Manual

Also see for AJ-PX270: Settings guide Quick guide Specifications Operating instructions Operating instructions

Contents

– 129 –Chapter 6 Menu Operations — Menu listMenu list[SCENE FILE]Configure the settings regarding scene files.This menu is used to set fine image quality settings of the camera images, select scene files, and read/write scene file data to the internal memory.These menu items cannot be set when the thumbnail screen is displayed.Item Description of settings[FILE SELECT] Selects the scene file (1 to 6).[F1:], [F2:FLUO.], [F3:SPARK], [F4:B-STR], [F5:CINE V], [F6:CINE D]f Factory setting: [F1:][NAME EDIT] Edits the name of the scene file selected in the scene file menu. (Maximum of six characters)[LOAD/SAVE/INITIALIZE] Loads/saves/initializes the setting values allocated on the current scene file number (any one from 1 to 6).[LOAD]: Selects and loads a scene file saved in the camera memory.[SAVE]: Specifies a title and file number for the current setting values and saves them as a scene file inthe camera memory.[INITIALIZE]: Initializes the selected scene files (1 to 6) to the factory settings.[VFR] Sets permission/prohibition of the variable frame rate (VFR).[ON], [OFF]f Factory setting: [OFF][FRAME RATE] Switches the shooting interval and exposure time when [VFR] is [ON].When [SYSTEM MODE] = 59.94 Hz:[60fps], [54fps], [48fps], [44fps], [40fps], [36fps], [34fps], [32fps], [30fps], [28fps], [27fps], [26fps],[25fps], [24fps], [22fps], [21fps], [20fps], [18fps], [15fps], [12fps], [9fps], [6fps], [4fps], [2fps], [1fps]When [SYSTEM MODE] = 50 Hz:[50fps], [48fps], [45fps], [42fps], [37fps], [34fps], [32fps], [30fps], [28fps], [27fps], [26fps], [25fps],[24fps], [23fps], [22fps], [21fps], [20fps], [18fps], [15fps], [12fps], [9fps], [6fps], [4fps], [2fps], [1fps]f Factory setting: [24fps] (when [SYSTEM MODE] = 59.94 Hz), [25fps] (when [SYSTEM MODE] = 50 Hz)[SYNC SCAN TYPE] Switches the synchro scan display settings.[sec]: Displays in time.[deg]: Displays at shutter open angle.f Factory setting: [sec][SYNCHRO SCAN] Displays the speed of the synchro scan shutter that is used when shooting video for television etc.When [SYNC SCAN TYPE] = [sec], and [SYSTEM MODE] = 59.94 Hz:f 60i/60p: [1/60.0]…[1/249.8]f 30P: [1/30.0]…[1/249.8]f 24P: [1/24.0]…[1/249.8]When [SYNC SCAN TYPE] = [sec], and [SYSTEM MODE] = 50 Hz:f 50i/50P: [1/50.0]…[1/250.0]f 25P: [1/25.0]…[1/250.0]When [SYNC SCAN TYPE] = [deg] (in 0.5 d steps, angle display): [3.0d]…[360.0d]f Factory setting: [1/60.0] (when [SYNC SCAN TYPE] = [sec], and [SYSTEM MODE] = 59.94 Hz)[MASTER DTL] Sets the level of the detail effect of the whole part.[−31]…[31]f Factory setting: [0][DTL CORING] Sets the level of signal (including noise) that does not activate the detail effect.[0]…[60]f Factory setting: [1][DETAIL SETTING] [DETAIL] Sets [ON]/[OFF] of the detail function.[ON], [OFF]f Factory setting: [ON][V.DTL LEVEL] Sets the intensity of the detail level in the vertical direction.[−7]…[7]f Factory setting: [0][H.DTL FREQ.] Sets the thickness of the detail level in the horizontal direction.[−7]…[7]f Factory setting: [0][V. DTL FREQ.] Sets the thickness of the detail level in the vertical direction.[0]…[2]f Factory setting: [1][LEVEL DEPEND.] When the detail of luminosity signal is emphasized, details in the darker parts are compressed.Details of bright areas are also compressed more when the value set for [LEVEL DEPEND.] is larger.[−7]…[7]f Factory setting: [0][KNEE APE LVL] Sets the detail level of high luminosity areas (high-brightness areas).[OFF], [1]…[5]f Factory setting: [2][DTL GAIN(+)] Sets the detail level of + direction (to make brighter).[−31]…[31]f Factory setting: [0][DTL GAIN(−)] Sets the detail level of − direction (to make darker).[−31]…[31]f Factory setting: [0]