| 
– 136 –Chapter 6 Menu Operations — Menu listItem Description of settings[USER8] Sets the function to be assigned to the button.[INHIBIT], [SCENE FILE SEL], [LEVEL GAUGE], [LEVEL GAUGE RESET], [WFM], [D.ZOOM], [DRS],[FBC], [S.GAIN], [1S.EXP.], [ATW], [ATW LOCK], [SPOTLIGHT], [BACKLIGHT], [BLACKFADE],[WHITEFADE], [A.IRIS LEVEL], [IRIS], [Y GET], [FOCUS ASSIST], [FOCUS MACRO], [OIS], [FASTZOOM], [ZEBRA], [EVF ON/OFF], [PRE REC], [TEXT MEMO], [SHOT MARK], [DEL LAST CLIP],[SLOT SEL], [REC MEDIA], [AUDIO MON SEL], [REC CHECK], [BACKGR REC PAUSE], [USBMODE], [PLAYLIST], [REC DURING UPLOAD], [UPLOAD LIST], [STREAMING START]f Factory setting: [IRIS][SW MODE]Configure the settings of each mode when switched using each switch.These menu items cannot be set when the thumbnail screen is displayed.Item Description of settings[LOW GAIN] Sets the gain value to be assigned to the position of the switch. (Negative value of gain isonly in [HIGH SENS.] mode.)[−3dB]…[18dB]f Factory setting: [0dB][MID GAIN] Sets the gain value to be assigned to the position of the switch. (Negative value of gain isonly in [HIGH SENS.] mode.)[−3dB]…[18dB]f Factory setting: [6dB][HIGH GAIN] Sets the gain value to be assigned to the position of the switch. (Negative value of gain isonly in [HIGH SENS.] mode.)[−3dB]…[18dB]f Factory setting: [12dB][SUPER GAIN] Sets the super gain to be assigned to the USER button.[24dB], [30dB], [36dB][ALL]: Each time the USER button is pressed, the setting toggles [24dB] → [30dB] → [36dB] → (off) inorder.f Factory setting: [36dB][OIS] Enables/disables the image stabilizer function.[ON]: Enables the image stabilizer function.[OFF]: Disables the image stabilizer function.f Factory setting: [ON]If functions are assigned to the USER buttons, switches [ON]/[OFF] using the USER button operations.[ATW] Assigns the auto tracking white balance function to the switch.[Ach], [Bch], [PRE], [OFF]f Factory setting: [OFF][ATW SPEED] Sets the control speed of the auto tracking white balance function.[FAST], [NORMAL], [SLOW]f Factory setting: [NORMAL][ATW TARGET R] Finely adjusts the Rch output for convergence with auto tracking white balance operation.[−10]…[10]f Factory setting: [0][ATW TARGET B] Finely adjusts the Bch output for convergence with auto tracking white balance operation.[−10]…[10]f Factory setting: [0][W.BAL PRESET] Sets the color temperature to be assigned to the position of the switch.[3200K], [5600K], [VAR]f Factory setting: [3200K][W.BAL VAR] Sets the value of [VAR] in [W.BAL PRESET].It can also be operated by the dial button.Enabled when [W.BAL PRESET] is set to [VAR] and the switch is at .[2000K]…[15000K]f Factory setting: [3200K][H.ZOOM SPEED] Sets the zoom speed when the HANDLE ZOOM switch is .[1]…[99]f Factory setting: [50][PUSH AF MODE] Assigns the operation mode when the button is pressed.[TURBO]: Performs high-speed focusing automatically until the image is focused, once the button ispressed.[NORMAL]: Performs automatic focusing while pressing the button.f Factory setting: [TURBO][MF ASSIST] Sets whether to adjust the last focus automatically when in the manual focus mode.[ON]: Adjusts the last focus automatically.[OFF]: Does not adjust the focus automatically.f Factory setting: [OFF]If the image is largely out of focus, the focus may not be adjusted properly.Operations with a remote control connected to the terminal are not available. |
