Panasonic AJ-PX270 Operating Instructions Manual

Also see for AJ-PX270: Settings guide Quick guide Specifications Operating instructions Operating instructions

Contents

– 137 –Chapter 6 Menu Operations — Menu listItem Description of settings[FOCUS ASSIST MODE] Sets the operation mode of the focus assist function.[EXPAND]: Expands the center part of the screen of the LCD monitor.[IN RED]: Outlines the contour of the video in red.f Factory setting: [EXPAND]If functions are assigned to the USER buttons, on and off of the function can be switched using the USERbutton operations.[MACRO] Enables/disables the focus macro function.[ON]: Enables the focus macro function.[OFF]: Disables the focus macro function.f Factory setting: [OFF]If functions are assigned to the USER buttons, switches [ON]/[OFF] using the USER button operations.[MACRO MODE] Sets the operation mode when the focus macro function is enabled.[WIDE]: Only the wide macro area is enabled.[ALL]: Tele macro area and wide macro area are enabled.f Factory setting: [WIDE][A.IRIS SPEED] Sets the control speed of the auto iris function.[FAST], [NORMAL], [SLOW]f Factory setting: [NORMAL][A.IRIS WINDOW] Selects the auto iris detection window.[NORM1]: Window that is near screen center.[NORM2]: Window that is near screen bottom.[CENTER]: Window that is a spot in the screen center.f Factory setting: [NORM1][AREA MODE] Assigns the function to be performed within the area selected using the control stick during shooting.[INHIBIT]: Does not allocate a function.[FOCUS]: Auto focus/focus bar function[IRIS]: Auto iris function[Y GET]: Brightness display function[FOCUS/IRIS]: Activates [FOCUS] and [IRIS] simultaneously.[FOCUS/Y GET]: Activates [FOCUS] and [Y GET] simultaneously.f Factory setting: [INHIBIT][WFM MODE] Selects the type of waveform to be displayed on the LCD monitor when the button is pressed.[WAVE]: Displays as a waveform.[VECTOR]: Displays as a vector.[WAVE/VECTOR]: Each time the button is pressed, the display changes in order from (no display)→ [WAVE] (waveform) → [VECTOR] (vector) → (no display).f Factory setting: [WAVE][ZEBRA] Displays/hides zebra patterns.[ON]: Displays zebra patterns.[OFF]: Does not display zebra patterns.f Factory setting: [OFF]If functions are assigned to the USER buttons, switches [ON]/[OFF] using the USER button operations.[ZEBRA MODE] Selects whether to keep displaying zebra patterns.[CONTINUE]: Keep the display of zebra patterns.[MOMENT]: Displays zebra patterns for approximately five seconds.f Factory setting: [MOMENT][BARS TYPE] Selects the color bar to use.[SMPTE]: Uses the color bar in the SMPTE standard.[FULL BARS]: Uses full color bars.[SPLIT]: Uses SPLIT color bars for SNG (Satellite News Gathering).[ARIB]: Uses ARIB standard color bars.f Factory setting: [SMPTE][FRONT REC] Sets operation of the REC button on the front of the camera.[INHIBIT]: Does not activate the operation.[ACTIVE]: Activates the operation.f Factory setting: [ACTIVE][ZOOM/FOCUS] Sets where to operate the zoom and focus in an IP remote connection.[IP REMOTE]: Works only when operation is done from the remote connection destination.[CAMERA]: Works only when operation is done from the camera.f Factory setting: [IP REMOTE][AUTO SW]Configure the settings regarding the auto mode.Auto iris, auto gain control, auto tracking white balance, and auto focus functions can be set separately.These menu items cannot be set when the thumbnail screen is displayed.Item Description of settings[A.IRIS] Enables/disables the auto iris control.[ON]: Performs the auto iris control operation when in auto mode. The button does not work.[OFF]: Auto iris control operation is not performed during auto mode. This activates the iris controlselected with the button.f Factory setting: [ON]