– 91 –Chapter 4 Shooting — Handling setting dataHandling setting dataSetting data file configurationScene files with [F1:] to [F6:] can be saved on the camera according to the settings in the main menu → [SCENE FILE].Scene file data ([F1:] to [F6:]) can be saved as a file, and up to eight files can be saved on the SD memory card at a time, which can be loaded andused.Setting menu values can be saved as one user file on the camera, and up to eight files can be saved on the SD memory card.[USER MENU] settings registered with [USER MENU SEL] can also be saved on or loaded from the camera and the SD memory card at the same timeas a user file.Setting data file structure of the camera is as follows.r Scene file*1 *1 *1 *1 *1 *1*2 *2 *2 *2 *2 *2*3[F1:](Factory settings)The camera(Current value)(Value saved on the camera)[F2:] [F3:] [F4:] [F5:] [F6:][F1:] [F2:] [F3:] [F4:] [F5:] [F6:][F1:] [F2:] [F3:] [F4:] [F5:] [F6:][F1:]SD memory cardScene file 1[F2:] [F3:] [F4:] [F5:] [F6:][F1:]Scene file 8[F2:] [F3:] [F4:] [F5:] [F6:]*1 Select [INITIALIZE] in the main menu → [SCENE FILE] → [LOAD/SAVE/INITIALIZE].By scene file unit as selected in the main menu → [SCENE FILE] → [FILE SELECT]*2 Select [LOAD] or [SAVE] in the main menu → [SCENE FILE] → [LOAD/SAVE/INITIALIZE].By scene file unit as selected in the main menu → [SCENE FILE] → [FILE SELECT]*3 Select [LOAD] or [SAVE] in the main menu → [CARD FUNCTIONS] → [SCENE FILE].[F1:] to [F6:] at oncer User file*1*2*3[USER FILE] (including [USER MENU])(Factory settings)The camera(Current value)(Value saved on the camera)[USER FILE] (including [USER MENU])[USER FILE] (including [USER MENU])SD memory cardUser file 1User file 8*1 Select [INITIALIZE] in the main menu → [OTHER FUNCTIONS] → [USER FILE].*2 Select [LOAD] or [SAVE] in the main menu → [OTHER FUNCTIONS] → [USER FILE].*3 Select [LOAD] or [SAVE] in the main menu → [CARD FUNCTIONS] → [USER FILE].Handling SD memory cardsThe SD memory card can be removed and inserted, either before or after the power is turned on.
