– 118 –Chapter 5 Playback — Thumbnail operationsStatus of clip metadata [USER CLIP NAME] to be recordedWhen no clip metadata has been loaded, or when setting disables recording of loaded clipmetadataSame as [GLOBAL CLIP ID]r [TYPE2]Status of clip metadata [USER CLIP NAME] to be recordedWhen clip metadata has been loaded Uploaded data + [COUNT] value*When no clip metadata has been loaded, or when setting disables recording of loaded clipmetadataSame as [CLIP NAME]* The [COUNT] value is indicated as a four-digit number.The [COUNT] value is incremented each time a new clip is generated, if the clip metadata has been loaded and [TYPE2] has been selected as the recordingmethod.The [COUNT] value can be reset using the following method.When you select [PROPERTY] in the main menu → [RECORDING SETUP] → [REC META DATA] and then select [USER CLIP NAME], the following screen isdisplayed. Move the cursor over [COUNT RESET], and press the control stick to reset the [COUNT] value to 1.Selecting the [CARD SERIAL] recordingWhen [ON] is selected in main menu → [RECORDING SETUP] → [REC META DATA] → [CARD SERIAL], the function that records the serial number ofthe P2 card as metadata (text memo without offset) is enabled.Initializing the metadata settingSelect [INITIALIZE] in the main menu → [RECORDING SETUP] → [REC META DATA] and press the control stick. Select [YES] when the confirmationscreen is displayed.The settings in the main menu → [RECORDING SETUP] → [REC META DATA] and later items, including loaded metadata, are initialized.Setting metadata display languageSet the language when displaying metadata. Select [LANGUAGE] in the main menu → [RECORDING SETUP] → [REC META DATA], then select thedisplay language, and press the control stick.When you select [NTSC (J)] as a region of use, you can choose either [ENGLISH] or [JAPANESE].@@ NOTEt Characters that cannot be displayed in English are not displayed properly but are displayed as “*”.t Only alphanumeric characters can be entered.Formatting a P2 card1 Select [FORMAT] in the main menu → [CLIP].f Select the slot number where the P2 card to be formatted is inserted, and press the control stick.f Select [EXIT] when you do not wish to format the card.2 Select [YES] using the control stick.The selected P2 card is formatted.@@ NOTEt Data deleted as a result of formatting cannot be restored. Always check the data before formatting.t If the CPS password has been set, the confirmation message whether to select the encrypted format [CPS(ENCRYPT)] or normal format [NORMAL] isdisplayed when selecting a slot. When the encrypted format is selected, the microP2 memory card is encrypted.Formatting SD memory cardsSD memory cards can also be formatted in the thumbnail screen. With an SD memory card inserted into the camera, perform the following operation.1 Select [FORMAT] in the main menu → [CLIP].
