– 15 –Chapter 1 Overview — What you can do with this cameraConnecting to the remote operation panel (AK-HRP200G)You can remote control some functions by connecting the remote operation panel AK-HRP200G (optional) using a LAN cable.LANAK-HRP200GConnecting to monitorA monitor can be connected to output images.Audio pin cable*1HDMI cable* 2BNC cable (composite/HD SDI/SD SDI)* 3Monitor*1 Cables are optionally available. They are not supplied with the camera.*2 Use an HDMI cable (optional) with double shielding. For the HDMI cable, using Panasonic HDMI cable is recommended.*3 For the BNC cable (optional) connected to the terminal, prepare a double-shielded cable equivalent to 5C-FB.Connecting to the networkWired LAN connectionThe following operations are available on your computer via LAN terminal:f Camera status checkf Thumbnail image checkf Proxy playbackf Download of proxy file/clip management informationf Displaying/editing of metadataf Adding/deleting of metadata (shot mark or text memo)f Camera remote control (collective operations of recording control and time code/user bits)In addition, the following operations are available via the LAN terminal.f Transferring of clips with the FTP client functionf Remote control function using the Remote Operation Panel (AK-HRP200G)Connection using wireless LAN and 4G/LTEAttaching the wireless module AJ-WM30 (optional) to the terminal (sub-host) of the camera allows you to connect the camera viawireless LAN (IEEE 802.11).The following operations are available using your tablet, smartphone, and computer.f Camera status checkf Thumbnail image checkf Proxy playbackf Displaying/editing of metadataf Adding/deleting of metadata (shot mark or text memo)f Camera remote control (collective operations of recording control and time code/user bits)In addition, clips can be transferred by the FTP client function via wireless LAN (access point connection) or 4G/LTE.
