– 73 –Chapter 4 Shooting — Convenient shooting functionsConvenient shooting functionsLow angle shootingWhen shooting at low angles, releasing the hold cover on the REC button on the handle from the position will allow shooting with the RECbutton on the handle.f To prevent accidental operation of the REC button on the handle when it is not in use, keep the hold cover to the position.Scan reverse shootingSet [ON] in the main menu → [SYSTEM MODE] → [SCAN REVERSE] to display and record the image in vertically or horizontally reverse.Zebra patterns displayThe camera can display two types of zebra patterns.Press the button displays the zebra pattern that is set in the menu.Zebra patterns can also be displayed in the video from the terminal according to the menu setting.The level for zebra pattern display can be set in the main menu → [DISPLAY SETUP].Item Description of settings[ZEBRA1 DETECT] Sets the extraction level of zebra pattern 1.[0%]…[109%]f Factory setting: [70%][ZEBRA2 DETECT] Sets the extraction level of zebra pattern 2.[0%]…[109%]f Factory setting: [85%][ZEBRA2] Sets on/off of zebra pattern 2 and selects the type.[ON], [SPOT], [OFF]f Factory setting: [SPOT][SPOT]: The image level from the setting value of [ZEBRA1 DETECT] to the setting value of [ZEBRA2 DETECT] is displayed in the zebra pattern.[ZEBRA2]Image level[ON] [OFF] [SPOT][109%][ZEBRA2 DETECT][ZEBRA1 DETECT][0%]To display the zebra patterns in the video of the monitor output terminal (), set in the main menu → [OUTPUT SEL] →[VIDEO OUT ZEBRA].Displaying the center markerDisplays when setting an item other than [OFF] in the main menu → [DISPLAY SETUP] → [CENTER MARK].@@ NOTEt The center marker display is not displayed in the images of terminals , , and .Displaying the safety zone markerThe items you select the main menu → [DISPLAY SETUP] → [SAFETY MARK] are displayed.The size of the safety zone marker can be changed in the main menu → [DISPLAY SETUP] → [SAFETY AREA].
