Panasonic AJ-PX270 Operating Instructions Manual

Also see for AJ-PX270: Settings guide Quick guide Specifications Operating instructions Operating instructions

Contents

– 142 –Chapter 6 Menu Operations — Menu listItem Description of settings[PROPERTY DISP.] Sets simple properties item displayed on the left of the thumbnail when [SMALL] is selected for[THUMBNAIL SIZE].[USER CLIP NAME]: Displays the user clip name.[START TC]: Displays the start time code.[REC DATE]: Displays the recorded date.[REC TIME]: Displays the recorded time.[NUM. OF AUDIO CH]: Displays the number of audio channels.[AUDIO RATE]: Displays the audio sampling rate.[AUDIO BIT]: Displays the audio bitrate.[CREATOR]: Displays the person who recorded the clip.[SHOOTER]: Displays the videographer.[PLACE NAME]: Displays the shooting location.[PROGRAM NAME]: Displays the program name.[SCENE NO.]: Displays the scene number.[TAKE NO.]: Displays the take number.[REPORTER]: Displays the reporter.[PURPOSE]: Displays the purpose of shooting.[OBJECT]: Displays the object of shooting.[START UB]: Displays the start user bits.[REC RATE]: Displays the recording frame rate.[LAST UP DATE]: Displays the date of last update.[LAST UP PERSON]: Displays the last person who updated.[MANUFACTURER]: Displays the equipment manufacturer name.[SERIAL NO.]: Displays the serial number.[MODEL NAME]: Displays the model name.[ALTITUDE]: Displays an altitude.[LONGITUDE]: Displays a longitude.[LATITUDE]: Displays a latitude.[1ST TEXT MEMO]: Displays the first text memo content.[THUMBNAIL OFFSET]: Displays the thumbnail recording position.[THUMBNAIL INFO.] Displays the number of selected clips and playback time of clip, etc.[NUM. OF CLIPS]: Displays the number of selected clips at the lower right of the thumbnail screen.[DUR. OF SEL CLIPS]: Displays the total playback time of selected clips.[TOTAL DURATION]: Displays the total playback time of the displayed clip.f Factory setting: [NUM. OF CLIPS][TEXT MEMO IND] Sets the display mode of the text memo indicator displayed for clips on the thumbnail screen.[ALL]: Displays the indicator for all clips with text memos attached.[HIDE CARD SERIAL]: Hides the text memo indicator for clips with only the following types of text memosattached.f Text memo with the serial number of card writtenf Other text memos for which offset is not set with clip metadataTo record a text memo with the serial number of card written as metadata, set the main menu →[RECORDING SETUP] → [REC META DATA] → [CARD SERIAL] to [ON].Check [OFFSET] of [MEMO] on the clip properties screen to see whether offset is set for a text memo.f Factory setting: [ALL][STORAGE COPYSETUP][VERIFY] Sets whether to verify or not when exporting in USB host mode.[ON]: Verifies.[OFF]: Does not verify.[AUDIO SETUP]Configure the settings regarding audio input/output.Item Description of settings[INPUT SETTING] [INT MIC] Sets built-in microphone on/off and selects the directionality.[STEREO]: Records audio from two directions in the front with the stereo microphone.[MONO]: This mode records clearer audio from the front by enhancing the directionality forward like ashotgun microphone. Audio recorded on the left and right are the same.[OFF]: Disables audio of the built-in stereo microphone.f Factory setting: [STEREO][INPUT1 MIC LEVEL] Sets the level of an external microphone connected to the

a microphone is connected.[−40dB], [−50dB], [−60dB]f Factory setting: [−50dB][INPUT2 MIC LEVEL] Sets the level of an external microphone connected to the

a microphone is connected.[−40dB], [−50dB], [−60dB]f Factory setting: [−50dB][INPUT1 LINE LEVEL] Sets the level of an external line input to be connected to the

externally connected devices.[4dB], [0dB]f Factory setting: [0dB][INPUT2 LINE LEVEL] Sets the level of an external line input to be connected to the

externally connected devices.[4dB], [0dB]f Factory setting: [0dB]