– 116 –Chapter 5 Playback — Thumbnail operationsf If the copy destination is a storage device, select the copy destination properties.3 Move the cursor to [YES] in the confirmation message and press the control stick.This starts copying of the clip.4 When the completion message appears, press the control stick.@@ NOTEt Turning off the power or inserting/removing a card during copying may damage the P2 card. If you accidentally make these mistakes, it can result indefective clips. After deleting the defective clips redo copying.t Copying is not performed when the following error messages are displayed.- [LACK OF CAPACITY!]Copying could not be performed because the recording capacity of the copy destination is insufficient.- [UNKNOWN CONTENTS FORMAT!]Copying could not be performed because a defective clip is selected.- [NO COPY TO SAME CARD!]Copying could not be performed because you are attempting to copy to the same card.- [TOO MANY CLIPS!]Copying could not be performed because there are too many clips selected.t If the copying is performed while a text memo is selected in the lower part of the text memo, the section between the selected text memo position andthe next text memo will be copied. If no text memo is found after the selected one, then the part after the selected text memo to the end of the clip iscopied. For details, refer to “Using a text memo to divide a clip and copy the necessary portion” (page 114).t To interrupt copying, press the button + button, or the control stick to cancel the operation. The clip being copied will be deleted fromthe copy destination.t When identical clips (same [GLOBAL CLIP ID]) exist on the destination, [OVERWRITE?] is displayed. Select [YES] when overwriting the clip, andselect [NO] when not overwriting the clip.Setting clip metadataInformation such as the name of the person who shot the video, the name of the reporter, the shooting location, or text memos can be loaded from anSD memory card, and can be recorded as clip metadata.Clip metadata itemsClip metadata includes the following items. Underlined items can be set by loading the metadata upload file on the SD memory card. Other items areset automatically during shooting. Using the latest update version of P2 Viewer Plus, metadata upload files can be written to SD memory cards using acomputer. Download and install the latest version of P2 Viewer Plus from the following website.http://pro-av.panasonic.net/For details on SD memory cards to be used, refer to “Cautions when using SD memory cards” (page 19).@@ NOTEt Files which were not edited using P2 Viewer Plus are displayed as [UNKNOWN DATA!] and may not be readable.[GLOBAL CLIP ID] Displays the global clip ID that shows the shooting status of the clip.[USER CLIP NAME] Displays the clip name set by the user.* 1[VIDEO] Displays [FRAME RATE] (frame rate of the clip), [PULL DOWN] (pull-down format), and [ASPECT RATIO].[AUDIO] Displays [SAMPLING RATE] (sampling frequency of recorded audio) and [BITS PER SAMPLE] (quantizing bits for recorded audio).[ACCESS] Displays [CREATOR] (person who recorded the clip), [CREATION DATE] (date when the clip was recorded), [LAST UPDATE DATE](date of the latest update of the clip), and [LAST UPDATE PERSON] (person who made the latest update of the clip).[DEVICE] Displays [MANUFACTURER] (name of the device manufacturer), [SERIAL NO.] (serial number of the device), and [MODEL NAME](model name of the device).[SHOOT] Displays [SHOOTER] (name of the person who shot the video), [START DATE] (start date of shooting), [END DATE] (end date ofshooting), and [LOCATION]/[ALTITUDE]/[LONGITUDE]/[LATITUDE]/[SOURCE]/[PLACE NAME] (altitude, longitude, latitude, andsource of the information and name of the location).[SCENARIO] Displays [PROGRAM NAME], [SCENE NO.], and [TAKE NO.].[NEWS] Displays [REPORTER] (name of the reporter), [PURPOSE] (purpose of shooting), and [OBJECT] (object of shooting).[MEMO]*2 Displays [NO.] (the number of the text memo), [OFFSET] (location of the frame where the text memo is added), [PERSON] (personwho recorded the text memo added to the clip), and [TEXT] (content of the text memo).[THUMBNAIL] Displays the location of the frame (frame offset) and the size (height and width) of the image selected as the thumbnail image.[PROXY] Displays information such as proxy format when proxy is added.*1 You can select the [USER CLIP NAME] recording method. For details, refer to “Selecting the [USER CLIP NAME] recording method” (page 117).*2 When entering [MEMO], make sure to enter [TEXT]. It is not possible to record only [PERSON] (the person inputting the memo), or [OFFSET] (the recordingposition).
