PLC-HF10000L Expand Serial Command Functional Specifications14/1055.3 Input Control Command TableExecute command ItemCF_INPUT_%1[CR] Select InputCF_SOURCE_%1[CR] Select Source of selected InputCF_INPUT1_%1[CR] Select Input1 and also set input source to %1CF_INPUT2_%1[CR] Select Input2 and also set input source to %1CF_INPUT3_%1[CR] Select Input3 and also set input source to %1CF_INPUT4_%1[CR] Select Input4 and also set input source to %1CF_SYSTEM_%1[CR] Select System in Video input mode5.4 Screen Command TableExecute command ItemCF_SCREEN_%1[CR] Select Screen sizeCF_DZCENT _%1[CR] Cancel Digital Zoom modeCF_KEYSTONE _%1[CR] Set Keystone correctionCF_KYSTNMODE _%1 [CR] Set Keystone store modeCF_CORNER-UL_%1[CR] Correct top-left cornerCF_CORNER-UR_%1[CR] Correct top-right cornerCF_CORNER-DL_%1[CR] Correct bottom-left cornerCF_CORNER-DR_%1[CR] Correct bottom-right cornerCF_CORNERTESTPAT_%1[CR] Select test pattern for Corner correction.CF_CEIL_%1[CR] Set ON/OFF of CeilingCF_REAR_%1[CR] Set ON/OFF of RearCF_VSCALE_%1[CR] Set V ScaleCF_VPOS_%1[CR] Set V PositionCF_HSCALE_%1[CR] Set H ScaleCF_HPOS_%1[CR] Set H PositionCF_SCREENASPECT_%1 [CR] Set Screen aspect function5.5 Lamp Command TableExecute command ItemCF_LAMPMODE_%1[CR] Select lamp modeCF_LAMPCONSTTAR_%1 [CR] Set Target value for Constant mode of Lamp modeCF_AUTOLAMPCONTRL_%1[CR] Switch dimmer function levels of Normal/Auto/EcoCF_LAMPLIFECONTROL_%1[CR] Select Lamp life controlCF_LAMPINTERVAL_%1[CR] Set Lamp interval5.6 Setting Command TableExecute command ItemCF_LANG_%1[CR] Select language for OSDCF_MENUPOSITION_%1[CR] Control of Menu positionCF_MENUSIZE_%1[CR] Set Menu sizeCF_DISP_%1[CR] Set ON/OFF of On Screen DisplayCF_BACKGND_%1[CR] Select screen for no signalCF_PIP_%1[CR] Set “Picture in Picture”CF_PIPMODE_%1[CR] Set mode of “Picture in Picture”CF_PIPMAININP_%1_%2[CR] Select Input and Source of Main picture for “Picture inPicture”
