Sanyo PLC-HF10000L - 10000 Lumens Manual

Also see for PLC-HF10000L - 10000 Lumens: Owner's manual Brochure Manual Specification sheet Owner's manual

Contents

PLC-HF10000L Expand Serial Command Functional Specifications43/1058.9 Setting Command8.9.1 CF_LANG CommandCommand “CF_LANG_%1” [CR]%1“ENG” --------------------------- Select ENGLISH“DEU” --------------------------- Select German“FRA” --------------------------- Select French“ITA” ----------------------------- Select Italian“ESP” ---------------------------- Select Spanish“POR” --------------------------- Select Portuguese“NED” --------------------------- Select Dutch“SVE” --------------------------- Select Swedish“JPN” --------------------------- Select Japanese“CHI” ---------------------------- Select Chinese“KOR” --------------------------- Select Korean“RUS” --------------------------- Select RussianDetailsSelect language for OSD. (Valid only when in the normal Power ON status.)The language set by this command is stored in EEPROM and the setting remainseffective after the power is turned to ALL OFF status.Acceptable “000” [CR]ResponseUnacceptable “Error Code” [CR]8.9.2 CF_ MENUPOSITION CommandCommand “CF_MENUPOSITION_%1” [CR]%1“UP” ----------------------------- Move Menu position to upper side.“DN” ----------------------------- Move Menu position to lower side.“LEFT” -------------------------- Move Menu position to left side.“RIGHT” ------------------------ Move Menu position to right side.DetailsMove Menu position. (Valid only when in the normal Power ON status.)This function is worked from the first reception of Command.* When setting beyond the area of movement is carried out, return “101” [CR] andthe command is not executed.Ex.) When movement to right side has already reached limit; and "RIGHT" isreceived.Acceptable “000” [CR]ResponseUnacceptable “Error Code” [CR]8.9.3 CF_MENUSIZE CommandCommand “CF_MENUSIZE_%1” [CR]%1 “NORMAL” -------------------- Select Menu size to Normal.“DOUBLE” --------------------- Select Menu size to Double.DetailsSelect Menu size. (Valid only when in the normal Power ON status.)The status set by this command is stored in EEPROM and the setting remainseven after the power is turned to ALL OFF status.Acceptable “000” [CR]ResponseUnacceptable “Error Code” [CR]