PLC-HF10000L Expand Serial Command Functional Specifications37/1058.7.6 CF_CORNER-DL CommandCommand “CF_CORNER-DL%1”[CR]%1“UP” ------------ Correct the horizontal line of image upwards“DN” ------------ Correct the horizontal line of image downwards“LEFT” --------- Correct the vertical line of image to the left“RIGHT” ------- Correct the vertical line of image to the rightDetailsCorrect the bottom-left corner of the image.(Available in normal Power ON status only)The correction starts with the first command receivedProjector returns error code “”101 and no operation is made when exceeding thecorrection limit.Acceptable “000” [CR]ResponseUnacceptable “Error Code” [CR]8.7.7 CF_CORNER-DR CommandCommand “CF_CORNER-DR_%1”[CR]%1“UP” ------------ Correct the horizontal line of image upwards“DN” ------------ Correct the horizontal line of image downwards“LEFT” --------- Correct the vertical line of image to the left“RIGHT” ------- Correct the vertical line of image to the rightDetailsCorrect the bottom-right corner of the image.(Available in normal Power ON status only)The correction starts with the first command receivedProjector returns error code “”101 and no operation is made when exceeding thecorrection limit.Acceptable “000” [CR]ResponseUnacceptable “Error Code” [CR]8.7.8 CF_CORNERTESTPAT CommandCommand “CF_CORNERTESTPAT_%1”[CR]%1“RED” ------------Select Red“WHITE” -------- Select White“BLUE” ---------- Select Blue“OFF” ------------ Select OffDetailsDisplay test patterns for Corner correction.(Available in normal Power ON status only)The value set by this command is stored in EEPROM and its setting is effectiveeven after ALL is OFF.Acceptable “000” [CR]ResponseUnacceptable “Error Code” [CR]8.7.9 CF_KEYSTONEMODE CommandCommand “CF_KYSTNMODE _%1” [CR]%1 “STR” --------- Set Keystone store mode to Store“RST” --------- Set Keystone store mode to ResetDetails Set Keystone store mode (Available only in the normal Power ON status)Acceptable “000” [CR]ResponseUnacceptable “Error Code” [CR]