PLC-HF10000L Expand Serial Command Functional Specifications50/1058.9.23 CF_BLENDTESTPAT CommandCommand “CF_BLENDTESTPAT_%1” [CR]%1 “ON” ---------------------- Set to On“OFF” -------------------- Set to OffDetailsSet Test pattern of Edge blending.(Available only in the normal Power ON status)The status set by this command is stored in EEPROM and setting remainseffective even after the power is turned to ALL OFF status.Acceptable “000” [CR]ResponseUnacceptable “Error Code” [CR]8.9.24 CF_BLENDRST CommandCommand “CF_BLENDRST_%1” [CR]%1 “RST” ---------------------- Reset current setting statusDetails Reset current setting status of Edge blending.(Available only in the normal Power ON status)Acceptable “000” [CR]ResponseUnacceptable “Error Code” [CR]8.9.25 CF_BLENDMENUOFF CommandCommand “CF_BLENDMENUOFF_%1” [CR]%1 “SET” ---------------------- Temporarily hide Edge blending menu and edge line“RST” ---------------------- Display Edge blending menu and edge lineDetails Set Menu off function of Edge blending.(Available only in the normal Power ON status)Acceptable “000” [CR]ResponseUnacceptable “Error Code” [CR]8.9.26 CF_BLENDMENU CommandCommand “CF_BLENDMENU_%1” [CR]%1 “ON” ---------------------- Display Edge blending menu and edge line.“OFF” --------------------- Set Edge blending menu and edge line undisplayed.Details Set Edge blending menu and edge line displayed or undisplayed.(Available only in the normal Power ON status)Acceptable “000” [CR]ResponseUnacceptable “Error Code” [CR]8.9.27 CF_COLORMATCHING CommandCommand “CF_COLORMATCHING_%1” [CR]%1 “ON” ---------------------- Set to On“OFF” -------------------- Set to OffDetailsSet status of Color matching. (Available only in the normal Power ON status)The status set by this command is stored in EEPROM and setting remainseffective even after the power is turned to ALL OFF status.Acceptable “000” [CR]ResponseUnacceptable “Error Code” [CR]
