PLC-HF10000L Expand Serial Command Functional Specifications80/1059.8 Screen Status Read Commands9.8.1 CR_SCREEN CommandCommand “CR_SCREEN” [CR]Details Get currently selected screen image sizeAcceptable “000_%1” [CR]%1“NORMAL” ---------------------- Normal mode“WIDE” --------------------------- Wide(16:9) mode“ZOOM” -------------------------- Zoom mode“NATURAL” -------------------- Natural wide mode“FULL” --------------------------- Full mode“TRUE” --------------------------- True mode“CUSTOM” ----------------------- Custom modeResponseUnacceptable“Error Code” [CR] -------------- When command is invalid in thegiven condition (such as being selected input)“?” [CR] ----------------------- When unknown command is received9.8.2 CR_KYSTNMODE CommandCommand “CR_KYSTNMODE” [CR]Details Get setting status of Keystone Store ModeAcceptable “000_%1” [CR]%1 “STR” ---------------------- Store mode is “Store”“RST” ---------------------- Store mode is “Reset”ResponseUnacceptable “?” [CR] -------------------- When unknown command is received9.8.3 CR_CORNERTESTPAT CommandCommand “CR_CORNERTESTPAT” [CR]Details Get setting status of test pattern for Corner correctionAcceptable “000_%1” [CR]%1“RED” ---------------------------- Test pattern is red“WHITE” ------------------------- Test pattern is white“BLUE” --------------------------- Test pattern is blue“OFF” ------------------------- Test pattern is not displayedResponseUnacceptable “?” [CR] -------------------- When unknown command is received9.8.4 CR_CEIL CommandCommand “CR_CEIL” [CR]Details Get setting status of CeilingAcceptable “000_%1” [CR]%1 “ON” --------------------------- Ceiling projection is enabled“OFF” ------------------------- Ceiling projection is disabledResponseUnacceptable “Error Code” [CR]