PLC-HF10000L Expand Serial Command Functional Specifications46/105DetailsSelect input and source of Sub picture of “Picture in Picture”. (Valid only when inthe normal Power ON status.)* In the case of a specific status, return Error Code “101” [CR] and the command isnot executed.- When selected Source does not meet the requirement for Input.- When selected Input3 / Input4 without Board in Input3 or Input4- When selected Input / Source is invalid in “Picture in Picture” mode.Acceptable “000” [CR]ResponseUnacceptable “Error Code” [CR]8.9.10 CF_PIPSIZE CommandCommand “CF_PIPSIZE_%1_%2” [CR]%1“1” -------------------- Set main picture size to 10%“2” -------------------- Set main picture size to 20%“3” -------------------- Set main picture size to 30%“4” -------------------- Set main picture size to 40%“5” -------------------- Set main picture size to 50%“6” -------------------- Set main picture size to 60%“7” -------------------- Set main picture size to 70%“8” -------------------- Set main picture size to 80%“9” -------------------- Set main picture size to 90%“10” ------------------ Set main picture size to 100%%2“1” -------------------- Set sub picture size to 10%“2” -------------------- Set sub picture size to 20%“3” -------------------- Set sub picture size to 30%“4” -------------------- Set sub picture size to 40%“5” -------------------- Set sub picture size to 50%DetailsSet display size of “Picture in Picture”.(Valid only when in the normal Power ON status.)*When “Picture in Picture” is set to Off, return “101” [CR]Acceptable “000” [CR]ResponseUnacceptable “Error Code” [CR]8.9.11 CF_PIPSIZEMAIN CommandCommand “CF_PIPSIZEMAIN _%1” [CR]%1 “UP” --------------------- Increment setting value of Main picture size.“DN” --------------------- Decrement setting value of Main picture size.Details Set the size of Main picture for “Picture in Picture”.(Available only in the normal Power ON status)Acceptable “000” [CR]ResponseUnacceptable “Error Code” [CR]8.9.12 CF_PIPSIZESUB CommandCommand “CF_PIPSIZESUB _%1” [CR]%1 “UP” --------------------- Increment setting value of Sub picture size.“DN” --------------------- Decrement setting value of Sub picture size.Details Set the size of Sub picture for “Picture in Picture”.(Available only in the normal Power ON status)Acceptable “000” [CR]ResponseUnacceptable “Error Code” [CR]