PLC-HF10000L Expand Serial Command Functional Specifications32/1058.6 Input Control Command8.6.1 CF_INPUT CommandCommand “CF_INPUT_%1” [CR]%1“1” ---------------------------------- Select Input 1“2” ---------------------------------- Select Input 2“3” ---------------------------------- Select Input 3"4” ---------------------------------- Select Input 4“UP”-------------------------------- Increment Input No. by 1“DN”-------------------------------- Decrement Input No. by 1DetailsSelect Input (Only valid when it is in the normal Power ON status.)This command works the same way as “INPUT” button of the projector andremote control.Acceptable “000” [CR]ResponseUnacceptable “Error Code” [CR]8.6.2 CF_SOURCE CommandCommand “CF_SOURCE_%1” [CR]%1“DIGITAL” ---------------- Select DVI Input“ANALOG” --------------- Select Analog Input“VIDEO” ------------------- Select Composite Video Input“S-VIDEO” ---------------- Select S-Video input“YPBPR” ------------------ Select Y, Pb/Cb, Pr/Cr Input“YCBCR” ------------------ Select Y, Pb/Cb, Pr/Cr Input“SDI1” --------------------- Select SDI 1 Input“SDI2” --------------------- Select SDI 2 Input“SCART” ------------------ Select SCART Input“HDCP” -------------------- Select HDCP Input“HDMI” -------------------- Select HDMI Input“LINKA-YCBCR” -------- Select LINK-A(YCBCR1) Input“LINKB-YCBCR” -------- Select LINK-B(YCBCR1)Input“DUAL-YCBCR1” --------- Select DUAL(YCBCR1)Input“DUAL-YCBCR2” -------- Select DUAL(YCBCR2)Input“DUAL-YCBCR3” -------- Select DUAL(YCBCR3)Input“DUAL-YCBCR4” -------- Select DUAL(YCBCR4)Input“DUAL-RGB1” -------- Select DUAL(RGB1)Input“DUAL-RGB2” -------- Select DUAL(RGB2)InputDetailsSelect source of the currently selected Input. (Valid only when in the normal PowerON status.)When selected Input does not meet the requirement for the specified %1, return“101” [CR] and the command is not executed.Acceptable “000” [CR]ResponseUnacceptable “Error Code” [CR]