PLC-HF10000L Expand Serial Command Functional Specifications35/1058.7 Screen Control Command8.7.1 CF_SCREEN CommandCommand “CF_SCREEN_%1” [CR]Input isPC signal“NORMAL” ---------------------- Select Normal mode“FULL” --------------------------- Select Full mode“WIDE” --------------------------- Select Wide (16:9) mode“ZOOM” ------------------------- Select Zoom mode“TRUE” -------------------------- Select True mode“CUSTOM” ---------------------- Select Custom mode“DZOOM□UP” ----------------- Expand image size by Digital Zoom“DZOOM□DN” ---------------- Compress image size by Digital Zoom“UP” ----------- The same operation as pressing Up key or Left key“DN” -----------The same operation as pressing Down key or RightkeyInput isVideo signal“NORMAL” ---------------------- Select Normal mode“FULL” --------------------------- Select Full mode“WIDE” --------------------------- Select Wide (16:9) mode“ZOOM” ------------------------- Select Zoom mode“NATURAL” --------------------- Select Natural wide mode“CUSTOM” -----------------------Select Custom mode“UP” ----------- The same operation as pressing Up key or Left key“DN” -----------The same operation as pressing Down key or Rightkey%1Commonin AV/PC “RST” ---------------------- Reset Screen adjustmentDetailsSelect screen size. (Valid only when in the normal Power ON status.)When selected Input does not meet the requirement for the specified %1, return“101” [CR] and the command is not executed.Acceptable “000” [CR]ResponseUnacceptable “Error Code” [CR]8.7.2 CF_DZCENT CommandCommand “CF_DZCENT_%1” [CR]%1 “CENT” -------------------- Cancel Digital Zoom (CENT: “CENTER”)Details Cancel Digital Zoom mode. (Valid only when in the normal Power ON status andInput for Computer is selected.)Acceptable “000” [CR]ResponseUnacceptable “101” [CR] ----------------- When input is Video
