2. With a clean, lint-free cloth that is moistened with water, wipe the feed rollers and the separationpad until they are clean.3. Close the document feeder cover.Cleaning the InteriorWarning• Never touch a labeled area on or near the heat roller in the fuser. You can get burned. If a sheet ofpaper is wrapped around the heat roller, do not try to remove it immediately. Power off the printerimmediately and wait 40 minutes for the fuser to cool. Try to remove the jam after the printer hascooled.• If you spill any toner in the printer, remove the toner using a moist cloth. Never use a vacuum cleanerto remove spilled toner. Sparks inside the vacuum cleaner can cause a fire or explosion.To prevent stains inside the printer that can deteriorate print quality, clean the interior of the printerregularly. Clean the printer interior whenever you replace the drum cartridge.After clearing paper jams or replacing a toner cartridge, inspect the inside of the printer before closingthe printer covers and doors.• Remove any remaining pieces of paper or debris. For more information, refer to Clearing Paper Jams.• Remove any dust with a dry, lint-free clean cloth.Adjustments and Maintenance ProceduresAdjusting Paper RegistrationUse Adjust Paper Registration to adjust the placement of the printed image on the page. The adjustmentallows you to place the top, bottom, left, and right margins exactly where you want. You can specify theimage position on both the front and back sides of the paper, for each installed paper tray.Verifying Paper Registration1. At the printer control panel, press the Home button.2. Log in as administrator. For details, refer to the System Administrator Guide atwww.xerox.com/office/VLB405docs.3. Touch Device > Support > Image Position.4. Select the source paper tray for the registration print.Xerox® VersaLink® B405 Multifunction Printer7-4User GuideMaintenance
