Jams During Automatic 2-Sided PrintingSolutionsProbable CausesUse paper of the correct size, thickness, or type. For more informa-tion, refer to Supported Paper Types and Weights for Automatic 2-Sided Printing.Using paper of the wrong size, thickness, ortype.Ensure that paper is loaded into the correct tray. For more informa-tion, refer to Supported Paper.Paper is loaded in the wrong tray.Load the tray with only one type and size of paper.Tray is loaded with mixed paper.Print-Quality ProblemsYour printer is designed to produce consistently high-quality prints. If you observe print-quality problems,use the information in this section to troubleshoot the problem. For more information, go towww.xerox.com/office/VLB405support.CautionThe Xerox Warranty, Service Agreement, or Xerox Total Satisfaction Guarantee does not cover damagecaused by using unsupported paper or specialty media. The Xerox Total Satisfaction Guarantee isavailable in the United States and Canada. Coverage could vary outside these areas. Please contactyour local representative for details.NoteTo ensure consistent print quality, the toner cartridges and imaging units for many models of equipmentare designed to cease functioning at a predetermined point.Controlling Print-QualityVarious factors can affect the quality of the output of your printer. For consistent and optimum printquality, use paper designed for your printer and set the paper type correctly. Follow the guidelines inthis section to maintain optimum print quality from your printer.Temperature and humidity affect the quality of the printed output. The guaranteed range for optimalprint quality is 15–28ºC (59–82ºF) and 20–70% relative humidity.Paper and MediaYour printer is designed to use various paper and other media types. Follow the guidelines in this sectionfor the best print quality and to avoid jams:• Use only Xerox approved paper. For details, refer to Supported Paper.• Use only dry, undamaged paper.Xerox® VersaLink® B405 Multifunction Printer8-20User GuideTroubleshooting
