Making a CopyTo make a copy:1. At the printer control panel, press the Home button.2. To clear previous App settings, touch Reset.3. Load your original documents.• Use the document glass for single pages or paper that cannot be fed using the duplex automaticdocument feeder. Lift the automatic document feeder, then place the original document facedown in the upper-left corner of the document glass.• For multiple, single, or 2-sided pages, use the duplex automatic document feeder. Remove anystaples or paper clips from the pages. Insert the original documents face up in the automaticdocument feeder, with the top of the page entering the feeder first. Adjust the paper guides sothat they fit against the document originals.4. Touch Copy, then enter the number of copies needed.NoteTo amend the number of copies entered, touch the X button, then enter the required quantity.5. If scanning from 2-sided original documents, touch 2-Sided, then select an option.6. Adjust copy settings as needed.For details about available features, refer to Apps Features.7. Touch Start. If you placed documents in the feeder, scanning continues until the feeder is empty.8. If you are scanning from the document glass, when prompted, do one of the following:• To complete the job and return to the Copy app, touch Done.• To scan another page, load a new original document on the document glass, then touch AddPage.• To delete the scan and return to the Copy app, touch Cancel, then touch Delete.Xerox® VersaLink® B405 Multifunction Printer4-18User GuideXerox® Apps
