Environmental Benefits of Duplex PrintingMost Xerox products have duplex printing, also known as 2-sided printing, capability. This enables youto print on both sides of the paper automatically, and therefore helps to reduce the use of valuableresources by reducing your paper consumption. The Lot 4 Imaging Equipment agreement requires thaton models greater than or equal to 40 ppm color or greater than or equal to 45 ppm monochrome theduplex function has been auto enabled, during the setup and driver installation. Some Xerox modelsbelow these speed bands may also be enabled with 2-sided printing settings defaulted on at the timeof install. Continuing to use the duplex function will reduce the environmental impact of your work.However, should you require simplex/1-sided printing, you may change the print settings in the printdriver.Paper TypesThis product can be used to print on both recycled and virgin paper, approved to an environmentalstewardship scheme, which complies with EN12281 or a similar quality standard. Lighter weight paper(60 g/m²), which contains less raw material and thus saves resources per print, may be used in certainapplications. We encourage you to check if this is suitable for your printing needs.ENERGY STARThe ENERGY STAR program is a voluntary scheme to promote thedevelopment and purchase of energy efficient models, which help toreduce environmental impact. Details on the ENERGY STAR programand models qualified to ENERGY STAR can be found at the followingwebsite: www.energystar.govThe ENERGY STAR and ENERGY STAR mark are registered UnitedStates trademarks.The ENERGY STAR Imaging Equipment Program is a team effortbetween United States, European Union, and Japanese governmentsand the office equipment industry to promote energy-efficient copiers,printers, fax, multifunction printers, personal computers, and monitors.Reducing product energy consumption helps combat smog, acid rain,and long-term changes to the climate by decreasing the emissionsthat result from generating electricity.For additional information on energy or other related topics, go towww.xerox.com/about-xerox/environment/enus.html orwww.xerox.co.uk/about-xerox/environment/engb.html.Power Consumption and Activation TimeThe amount of electricity that a device consumes depends on the way the device is used. This device isdesigned and configured to enable you to reduce your electricity usage.Power Saver modes are enabled on your device to reduce energy consumption. After the last print, thedevice transitions to Ready mode. In this mode, the device can print again immediately. If the deviceis not used for a specified period, the device transitions to Low Power mode, then to Sleep mode. Inthese modes, to enable reduced-power consumption, only essential functions remain active. The devicetakes longer to produce the first print after it exits the Power Saver modes than it takes to print in Readymode. This delay is the result of the system waking up and is typical of most imaging devices on themarket.B-3Xerox® VersaLink® B405 Multifunction PrinterUser GuideRegulatory Information
