|
More Fax Options - Fax105OffDisables the feature.OnSets the F Code transmission. [F Code] and [Password] are displayed at the right sideof the screen.• F Code - You can enter an F Code composed of spaces, numerals (0-9), andsymbols (#, *) up to 20 characters. Enter the code using the numeric keypad on thecontrol panel.• Password - You can enter a password composed of spaces, numerals (0-9), andsymbols (#, *) up to 20 characters. Enter the code using the numeric keypad on thecontrol panel.More Fax Options - FaxThis section describes the advanced features available for fax transmissions. Forinformation, refer to the following:Remote Polling – page 105Store for Polling – page 106On-hook (Manual Send/Receive) – page 1081. Make sure that the Fax service is enabled.2. Press the buttonon the control panel.3. Select [Fax] on the touchscreen.4. Select the [More Fax Options]tab.5. Select the required feature.Remote PollingThis feature allows you to retrieve a document from a remote machine, referred to as“remote polling”. The remote machine information is entered using the same methodfor sending faxes, but the [Remote Polling] option is used to initiate retrieving the faxfrom the remote machine. You must know the mailbox number and the passcode (if setup) of the remote machine to retrieve the document.NOTE: To poll a document from a remote machine, the remote mailbox feature mustbe enabled. For more information, refer toRemote Mailbox on page 103.NOTE: The DTMF (dual tone multi-frequency) method and F Code (ITU-Tsubaddress) method can also be used to poll a document from a remote machine. Formore information, refer toSpecial Characters on page 84 orF Code on page 104.
|
