Scan to PC127NOTE: If Remote Authentication has been enabled, a popup message will prompt theuser to enter a login ID and password before using the Scan to PC service. The loginID and password will be passed to the Kerberos server. Only when the user has beenauthenticated, the feature will be made available.Address BookThis feature allows you to select a destination server from the Address Book. Forinformation on how to register destinations, refer to the Setups chapter in the SystemAdministration Guide.1. Select [Address Book] on the[Scan to PC] screen.2. From the Address Book list,select a destination server, andthen select the [Add J] button.3. Select [Close].Name/ProtocolDisplays the destination server information registered in the Address Book.DetailsDisplays the detailed settings of a selected server.Add JAdds a selected destination server to the [Save in] field.Save inDisplays a selected destination server and its details.BrowseThis feature allows you to select a location on the network to save a scanneddocument. Browsing starts at the workgroup level, proceeds to the server level, andthen to multiple hierarchical levels of shared folders.NOTE: The [Browse] button is grayed out and cannot be selected when [FTP] isselected for [Transfer Protocol]. This button does not appear when an IPv4 address isnot assigned to the machine. For details on the protocol settings, refer to the Setupschapter in the System Administration Guide.1. Select [Browse] on the [Scan toPC] screen.2. Select the required options.3. Select [Save].PreviousRetraces one step up in the hierarchy.
