3 Copy60Parallel EdgesAllows you to specify the edge erase amounts for top and bottom and/or left and rightedges. Up to 50 mm (2 inches) can be erased from each edge.Image ShiftThis feature allows you to change the position of the image on the output copy paper.NOTE: Make sure that the orientation of the documents and the [Original Orientation]setting on the [Layout Adjustment] screen are the same.NOTE: The amount of the image shift depends on the size of paper loaded in themachine.NOTE: When [Mixed Sized Originals] is selected, the amount shifted is determined bythe image position of the first sheet, and is applied to all subsequent sheets of thedocuments.1. Select [Image Shift] on the[Layout Adjustment] screen.2. Select the required option.3. Select [Save].No ShiftDisables the feature.Auto CenterAutomatically places the image in the center of the copy paper.Margin ShiftMoves the image by specified amounts on the copy paper in the Up/Down and Left/Right directions. You can enter up to 50 mm (2 inches) for both dimensions.If your machine is configured to make double-sided copies, you can select the optionsbelow for both Side 1 and Side 2.• Side 1 - Allows you to move the image on Side 1. You can specify an offset of up to50 mm (2 inches) for both dimensions using the scroll buttons.• Side 2 - Allows you to move the image on Side 2. You can specify an offset of up to50 mm (2 inches) for both dimensions using the scroll buttons.• Mirror Side 1 - Automatically shifts the image on Side 2 to mirror Side 1.Image RotationThis feature allows you to automatically rotate the image to match the orientation of thepaper in the tray.1. Select [Image Rotation] on the[Layout Adjustment] screen.2. Select the required option.3. Select [Save].
