Copy51Paper SupplyThe available paper trays are displayed on the touch screen together with the mediasize and orientation preset for each tray.When changing the size or type of media in a tray, the tray must be reprogrammed bythe System Administrator to match the media being loaded. For more information onreprogramming the tray, contact the System Administrator.For information on the sizes and types of media supported by the machine, refer to thePaper and Other Media chapter in the System Administration Guide.1. Select a preset button or [More]for the [Paper Supply] feature onthe [Copy] screen.MoreDisplays the [Paper Supply] screen. For more information, refer to[Paper Supply]Screen on page 51.[Paper Supply] ScreenAllows you to select a paper tray from the preset trays, including Tray 5 (Bypass).PresetsAllows you to select a paper trayfrom the three preset trays set up bythe System Administrator. The traynumber, paper size, and paperorientation are also displayed for alltrays.5 JDisplays the [Tray 5] screen when a paper size and type are not preset by the SystemAdministrator. For more information, refer to[Tray 5] Screen on page 51.Auto Paper SelectAllows you to select an appropriate tray automatically according to the document size,amount of reduction or enlargement, and related features settings.NOTE: When [Paper Supply] is set to [Auto Paper Select], [Reduce/Enlarge] isautomatically set to [100%] and [Auto %] cannot be selected.[Tray 5] ScreenYou can temporarily use Tray 5 (Bypass) to load paper that is unavailable from Trays1-4. Up to a 10 mm (0.4 inch) stack of paper (approximately 95 sheets of 80 g/m 2paper) can be loaded in Tray 5 (Bypass).Paper Size• Auto Size Detect - Detects thepaper size automatically.• Standard Size - Displays thepreset paper sizes on the touch
