Output Format65CoversThis feature allows you to add a front and/or back cover to a copy job.NOTE: If the machine’s memory becomes full while scanning a document with thisfeature enabled, follow the instructions on the screen to cancel the job. Delete thestored documents, or reduce the amount of pages to free some memory and try again.NOTE: This feature is unavailable when [Uncollated] or [With Separators] is selectedin [Copy Output].1. Select [Covers] on the [OutputFormat] screen.2. Select the required options.3. Select [Save].No CoversDisables the feature.Front Cover OnlyInserts a front cover page before the first page of the document. A different paper typethan the main body pages can be used.Front & Back CoversInserts cover pages before the first page and after the last page of the document. Adifferent paper type than the main body pages can be used.Covers• Blank Covers - Adds a blank cover to the documents.• Printed Covers - Copies the first and last pages of the documents onto the coverstock. Add blank sheets to the set of documents if you want the inside front coverand inside back cover to remain blank.Paper SupplyDisplays the [Covers - Paper Supply] Screen. Select one of the presets to specify the[Main Body Tray] and [Cover Tray]. The paper loaded in the trays selected for [MainBody Tray] and [Cover Tray] should be the same size and orientation. For moreinformation on Tray 5 (Bypass), refer to[Tray 5] Screen on page 51.Depending on the trays installed on the machine, the name of this button may bedifferent.Transparency OptionsThis feature allows you to place blank page separators between documents whencopying onto transparency stock, and to make hard copy sets for handouts. Handoutscan be 1 sided or 2 sided and stapled.1. Select [Transparency Options]on the [Output Format] screen.2. Select the required option.3. Select [Save].
