Layout Adjustment59Binding Edge EraseErases printing of the center binding area of the book that tends to be shadowed dueto the fold in the pages. Use the scroll buttons to specify the area to be erased from thecenter of an open book within the range of 0-50 mm (0.0-2.0 inches) in 1mm (0.04 inch)increments.Original SizeThis feature allows you to set the size of the document automatically, to select from alist of preset sizes, or to mix different size documents. If you select a preset size,documents will be copied according to the specified size regardless of their actual size.1. Select [Original Size] on the[Layout Adjustment] screen.2. Select the required option.3. Select [Save].Auto DetectAutomatically detects the size of standard sized documents.Manual Size InputAllows you to select the input size from the 11 preset standard sizes in portrait orlandscape orientations, or select a custom size within the ranges of 15-297 mm (0.6-11.7 inches) for length and 15-432 mm (0.6-17.0 inches) for width. The presets are setup by the System Administrator.Mixed Sized OriginalsAllows you to copy more than one original size document. The machine senses themixed sized originals automatically, and copies each document at the same size as theoriginals. Load different size documents, with top left corners aligned, into theDocument Feeder.NOTE: 5.5 × 8.5" and A5 originals must be loaded in portrait orientation.NOTE: Confirm that the orientation of the documents and the [Original Orientation]setting on the [Layout Adjustment] screen are the same.Edge EraseThis feature allows you to erase unwanted marks such as hole-punch marks from eachedge of the copy.NOTE: Make sure that the orientation of the documents and the [Original Orientation]setting on the [Layout Adjustment] screen are the same.1. Select [Edge Erase] on the[Layout Adjustment] screen.2. Select the required options.3. Select [Save].All EdgesErases the same amount from all four edges of your document. If you do not want toerase any edges, select [Parallel Edges] and select 0.0 using the scroll buttons.
