Layout Adjustment137Original Orientation• Upright Images - Selects the vertical orientation, where the top of the document isorientated towards the back of the machine.• Sideways Images - Selects the horizontal orientation, where the top of the documentis orientated towards the left of the machine.Reduce/EnlargeThis feature allows you to enlarge or reduce a scanned document by a specified ratiowithin the range of 25-400%.1. Select [Reduce/Enlarge] on the[Layout Adjustment] screen.2. Specify a ratio using the arrowbuttons, or select a presetbutton.3. Select [Save].NOTE: For the WorkCentre 5225A/5230A, when [MRC High Compression] in [FileFormat] is set to [On], this feature is automatically set to 100%.Proportional %• Text box - Allows you to specify a desired reduction/enlargement ratio using thescroll buttons. You can also enter the value by touching the text box and using thenumeric keypad on the control panel. The value can be specified within the range of25-400% in 1% increments.• 100% - Scans at the same size as the original document.• Presets - Allows you to select a reduction/enlargement ratio from the seven presetratios. The presets are set up by the System Administrator.Enter Output SizeAllows you to select an output size from the standard paper sizes.Original OrientationThis feature allows you to specify the orientation of your document.1. Select [Original Orientation] onthe [Layout Adjustment] screen.2. Select the required option.3. Select [Save].NOTE: For the WorkCentre 5225A/5230A, when the Searchable Text feature is enabled in [File Format], the [Searchable- Page Orientation] setting in the System Administration mode overrides this [OriginalOrientation] setting. For details on the [Searchable - Page Orientation] setting, refer tothe Setups chapter in the System Administration Guide.
