3 Copy483. Set the required features on each tab. If [More] is selected, select [Save] toconfirm the selected feature or [Cancel] to return to the previous screen.For information on the features available on each tab, refer to the following:Copy – page 49Image Quality – page 55Layout Adjustment – page 57Output Format – page 62Job Assembly – page 723. Enter the QuantityThe maximum copy quantity is 999.1. Use the numeric keypad to enterthe number of copies required.The number entered isdisplayed in the upper rightcorner of the touch screen.NOTE: To cancel an incorrect entry,press the button, and enter thecorrect quantity.4. Start the Copy Job1. Press the button. Eachdocument is scanned. Thenumber of copies remaining isdisplayed in the upper rightcorner of the touch screen.While copying, if the document feeder or document glass is ready, you can scan thenext document or program the next job. You can also program the next job while themachine is warming up.5. Check the Status of the Copy Job1. Press the buttonon the control panel to displaythe [Active Jobs] tab.The queued copy job is displayed. If the job is not displayed, it may have already beenprocessed.For more information, refer to the Job Status chapter in the System AdministrationGuide. button button
