3 Copy70[Format & Style] ScreenFont SizeAllows you to specify the font size ofthe date, page numbers, andcomments using the scroll buttons onthe screen or the numeric keypad onthe control panel, within the range of6 to 18 points in 1 point increments.Side 2 OptionsAllows you to specify the position of the date, page numbers, and comments on Side 2to [Same as Side 1] or [Mirror Side 1].WatermarkThis feature allows you to add a watermark beneath the original image of the copyoutput. Information such as a control number, predetermined text, date and time, andthe machine serial number can be added.1. Select [Watermark] on the[Output Format] screen.2. Select the required option.3. Select [Save].Control NumberDisplays the [Watermark - Control Number] screen. This option prints sequentialcontrol numbers on each copy set. The following options are available:• Off - Disables the feature.• On - Enables the feature. Specify a start number between 1 and 999 using the scrollbuttons. You can also enter the number by touching the text box and using thenumeric keypad on the control panel.Stored WatermarksDisplays the [Stored Watermarks] screen. This option prints a predetermined phrase onthe output copies. The following options are available:• Off - Disables the feature.• On - Enables the feature. Select from the predetermined phrases set up by theSystem Administrator.User Account NumberPrints your account number on the copies.NOTE: This feature is displayed only when the Authentication feature is enabled.• Off - Disables the feature.• On - Enables the feature.Date & TimeDisplays the [Watermark - Date & Time] screen. This option prints the date and time oneach of the output copies. Select [On] to enable the feature.
