Xerox WorkCentre 5225 User Manual

Also see for WorkCentre 5222: System administration guide Reference guide System administration guide Quick use guide Evaluator guide

Contents

Xerox WorkCentre 5225 User Manual Manual pdf 53 page image

Copy532 J 2 SidedMakes double-sided copies from double-sided documents.2 J 1 SidedMakes single-sided copies from double-sided documentsRotate Side 2Rotates side 2 of the printouts head to toe.NOTE: This check box is available for all options except [1 J 1 Sided].Copy OutputThis feature allows you to sort copy outputs. If an optional finisher has been installed,the stapling, hole-punching, and/or folding feature is also available. You can select thestaple and/or hole-punch position on the copy output.NOTE: The features displayed on the screen vary depending on whether a finisher isinstalled on your machine, whether the installed finisher is an Office Finisher LX or anIntegrated Office Finisher, and what options are installed on the finisher.NOTE: If the correct size paper is not loaded in the machine when the stapling and/orhole-punching feature is applied to a copy or print job, a paper size error may occur.When this happens, the finisher contains the wrong size paper already processed upto this point. If the machine displays a message saying that the paper loaded in a trayis different from the settings, open the finisher top cover, and remove the wrong sizepaper, load the correct size paper in the tray, and restart the job. If you simply replacethe paper in a tray, and resume the job without removing the processed paper in thefinisher, the machine will staple and/or hole punch the wrong size paper still in thefinisher together with the correct size paper from the tray.1. Select a preset button or [More]for the [Copy Output] feature onthe [Copy] screen.NOTE: The screen shown on theright is displayed when the OfficeFinisher LX is installed. If theIntegrated Office Finisher is installed, or if a finisher is not installed, the display will bedifferent.CollatedDelivers the specified number of copy sets in the same order as the documents. Othercollation options are available on the [Copy Output] screen. For more information, referto[Copy Output] Screen on page 54.1 StapleAttaches one staple to the top left corner of your output. Other stapling options areavailable on the [Copy Output] tab. For more information, refer to[Copy Output] Screenon page 54.FoldingDisplays the [Folding] screen where you can select a folding option for your output.NOTE: When copying a document using this feature, wait until the copy job iscompleted before taking the copies out of the output tray.