|
Image Quality55NOTE: The above Hole Punch options are displayed when the 2 & 3 Hole Punch Unitis installed. When the 2 & 4 Punch Unit is installed, the options available are [NoPunch], [2 Hole Punch], [4 Hole Punch], and [Top]. When the 4 Hole Punch Unit isinstalled, the options available are [No Punch], [4 Hole Punch], and [Top].Collation• Collated - Delivers the specified number of copy setsin the same order as the documents. For example,two copies of a three-page document are delivered inthe order 1-2-3, 1-2-3.• Uncollated - Delivers the copies in stacks based onthe number of copies required for each document.For example, two copies of a three-page documentare delivered in the order 1-1, 2-2, 3-3. Stapling is notavailable when [Uncollated] is selected.• With Separators - Delivers the copies in stacks, based on the number of copiesrequired for each document, with a separator between each stack. Select the [PaperSupply] button to specify the paper tray containing the separator paper. Stapling isnot available when [With Separators] is selected.Output DestinationDisplays the [Output Destination] screen. Select an output tray for the copy job.Image QualityThis section describes the features used to adjust the quality of the output image. Formore information on the features available, refer to the following:Original Type – page 56Image Options – page 56Background Suppression – page 571. Press the buttonon the control panel.2. Select [Copy] on the touchscreen.3. Select the [Image Quality] tab.4. Set the required feature.5. Select [Save].
|
