Safety Notes15– In a hot, humid, dusty or poorly ventilated environment– In direct sunlight– Near ovens or humidifiers• Always lock the wheels of this product after installation.Operational Safety Information• To avoid the risk of electric shock and a fire accident, switch off and unplug theproduct promptly in the following conditions, then contact your local Xeroxrepresentative.– The product emits smoke or its surface is unusually hot.– The product emits unusual noise or odor.– The power cord is cracked or worn down.– A circuit breaker, fuse or any other safety device is activated.– Any liquid is spilled into the product.– The product is soaked in water.– Any part of the product is damaged.• Do not insert any object into slots or openings of this product. Do not place any ofthe followings on the product:– Liquid container such as flower vases or coffee cups– Metal parts such as staples or clips– Heavy objects• Do not use conductive paper, e.g. carbonic paper or coated paper.• Do not use aerosol cleaners. Aerosol cleaners can be explosive or flammable whenused on electromechanical equipment.• If you need to pull out a tray to remove paper jam, contact your local Xeroxrepresentative.• Always follow all warning instructions marked on or supplied with this product.• Keep electrical and mechanical safety interlocks active. Keep the safety interlocksaway from magnetic materials.• Do not attempt to remove a paper jammed deeply inside the product, particularly apaper wrapped around a fuser or a heat roller. Switch off the product promptly andcontact your local Xerox representative.• Never touch the paper output area of the finisher during operation.• Be careful in removing jammed staples.• Do not apply excessive force when placing a thick document on the document glass.• To move this product to another location, contact your local Xerox representative.Battery Safety InformationCAUTION: RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECTTYPE. DISPOSE OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS.
