u Terminal ConfigurationThe control circuit terminals should be arranged as shown in Figure 3.26.MA MB MCM1 M2 M5M3 M4 M6E(G) HC H1 H2 DM+ DM- IG R+ R- S+ S-S1 S2 S3 S4 S5 S6 S7 S8 SN SC SPV+ AC V- A1 A2 A3 FM AM AC MP RP ACA BEDCA – Terminal Block (TB 2)B – Terminal Block (TB 5)C – Terminal Block (TB 1)D – Terminal Block (TB 3)E – Terminal Block (TB 4)Figure 3.26 Control Circuit Terminal Arrangementn Wire Size and Torque SpecificationsSelect appropriate wire type and gauges from Table 3.10. For simpler and more reliable wiring, use crimp ferrules on the wireends.Table 3.10 Wire GaugesTerminalBlock Terminal ScrewSizeTighteningTorqueN•m(lb. in)Bare Wire Terminal Ferrule-Type TerminalWire TypeRecomm.wire sizemm2 (AWG)Applicablewire sizemm2 (AWG)Recomm.wire sizemm2 (AWG)Applicablewire sizemm2 (AWG)TB1, TB2,TB3, TB4S1-S8, SN, SC,SP, MA, MB,MC, M1-M6, V+, V-, AC, A1,A2, FM, AM,P1, P2, C1, C2,HC, H1, H2,DM+, DM-, IG,R+, R-, S+, S-M3 0.5 to 0.6(4.4 to 5.3)0.75 (18)Stranded wire:0.2 to 1.0(24 to 17)Solid wire:0.2 to 1.5(24 to 16)0.5 (20) 0.25 to 0.5(24 to 20) Shielded wire,etc.E(G) 1.0 (16)TB5 E(G) M3.5 0.5 to 1.0(4.4 to 8.9) 1.25 (12) 0.5 to 2(20 to 14) – –3.7 Control Circuit WiringYASKAWA ELECTRIC TOEP C710616 41G YASKAWA AC Drive - A1000 Quick Start Guide 1073 Electrical Installation