| Configuring Basic Settings | 102Time zone Time zone Time zone Time zone0 Spain-Canary Islands(Las Palmas)+08:45 Eucla0 United Kingdom(London)+09:00 Korea (Seoul)0 Morocco +09:00 Japan (Tokyo)+01:00 Albania (Tirane) +09:00 Russia (Yakutsk, Chita)+01:00 Austria (Vienna) +09:30 Australia (Adelaide)+01:00 Belgium (Brussels) +09:30 Australia (Darwin)+01:00 Caicos +10:00 Australia (Sydney,Melbourne, Canberra)+01:00 Chad +10:00 Australia (Brisbane)+01:00 Spain (Madrid) +10:00 Australia (Hobart)+01:00 Croatia (Zagreb) +10:00 Russia (Vladivostok)+01:00 Czech Republic (Prague) +10:30 Australia (Lord HoweIslands)+01:00 Denmark (Kopenhagen) +11:00 New Caledonia (Noumea)+01:00 France (Paris) +11:00 Russia (SrednekolymskTime)+01:00 Germany (Berlin) +11:30 Norfolk Island+01:00 Hungary (Budapest) +12:00 New Zealand(Wellington, Auckland)+01:00 Italy (Rome) +12:00 Russia (Kamchatka Time)+01:00 Luxembourg(Luxembourg)+12:45 New Zealand (ChathamIslands)+01:00 Macedonia (Skopje) +13:00 Tonga (Nukualofa)+01:00 Netherlands (Amsterdam) +13:30 Chatham Islands+01:00 Namibia (Windhoek) +14:00 KiribatiNTP SettingsYou can set a NTP time server for the desired area as required. The NTP time server address can be offered by theDHCP server or configured manually.Procedure1. Do one of the following:• On your web user interface, go to Setting > Date & Time.• On your VCS, go to More > Setting > Basic > Date & Time.On your VP59, tap Setting > Basic > Date & Time.• On your CTP20, tap Setting > Basic > Date & Time.2. Configure and save the following settings:
