| Configuring Basic Settings | 103Parameter Description Configuration MethodManual Time/Time Type Select Off/SNTP Setting toobtain the time and date from theNTP server automatically.Web user interfaceEndpointCTP20DHCP Time Enable or disable the system toupdate time with the offset timeoffered by the DHCP server.Note: the default value is Off. Itis only available when the timezone is GMT 0.Web user interfaceTime Zone Configure the time zone. Formore information on availabletime zone, refer to Expand-Timezone.Default: +8China (Beijing).Web user interfaceEndpointCTP20NTP Primary Server/PrimaryServer Configure the NTP primaryserver.Default: cn.pool.ntp.org.Web user interfaceEndpointCTP20NTP Secondary Server/Secondary Server Configure the NTP secondaryserver.Default: cn.pool.ntp.org.Web user interfaceEndpointCTP20Synchronism (15~86400s) Configure the interval (inseconds) to update time and datefrom the NTP server.Default: 1000.Web user interfaceConfiguring the DSTYou can set Daylight Saving Time (DST) for the system according to the location. By default, the DST is set toAutomatic, so it can be adjusted automatically from the current time zone configuration.Procedure1. Do one of the following:• On your web user interface, go to Setting > Date & Time.• On your VCS, go to More > Setting > Basic > Date & Time.On your VP59, tap Setting > Basic > Date & Time.• On your CTP20, tap Setting > Basic > Date & Time.2. Configure and save the following settings: